ARM: configs: Add STM32 defconfig

Started by Maxime Coquelin on Feb 20, 2015

Subsystems (2)

Maintainers (2)

DORMANTno replies

open the first message on its own page

Message details and related content
This patch adds a new config for STM32 MCUs.
STM32F429 Discovery board boots successfully with this config applied.

Signed-off-by: Maxime Coquelin <redacted>
---
 arch/arm/configs/stm32_defconfig | 72 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 arch/arm/configs/stm32_defconfig
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
new file mode 100644
index 0000000..3d7802a
--- /dev/null
+++ b/arch/arm/configs/stm32_defconfig
@@ -0,0 +1,72 @@
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="./rootfs.cpio"
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_STM32=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0xd0000000
+CONFIG_FLASH_MEM_BASE=0x08000000
+CONFIG_FLASH_SIZE=0x00200000
+CONFIG_PREEMPT=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x08020000
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help