Thread (22 messages) flat view 22 messages, 4 authors, 2014-09-19

Re: [PATCH 8/9] Add devicetree bindings for Rockchip Soc EDP

From: Heiko Stübner <heiko@sntech.de>
Date: 2014-08-04 19:38:28
Also in: dri-devel, linux-devicetree, lkml

Am Montag, 4. August 2014, 12:55:59 schrieb mark yao:
quoted hunk ↗ jump to hunk
Signed-off-by: mark yao <redacted>
---
 .../devicetree/bindings/video/rockchip-panel.txt   |   34
++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/rockchip-panel.txt
b/Documentation/devicetree/bindings/video/rockchip-panel.txt index
f599806..f6d80f6 100644
--- a/Documentation/devicetree/bindings/video/rockchip-panel.txt
+++ b/Documentation/devicetree/bindings/video/rockchip-panel.txt
@@ -80,3 +80,37 @@ Example:
 		rockchip,data-width = <24>;
 		rockchip,panel = <&panel>;
 	};
+
+Rockchip RK3288 EDP interface
+================================
+Required properties:
+-compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+- clocks: from common clock binding: handle to dp clock.
+	of memory mapped region.
+- clock-names: from common clock binding:
+	Required elements: "clk_edp"
+			"clk_edp_24m"
+			"clk_edp_24m_parent"
+			"pclk_edp"
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+- resets: Must contain an entry for each entry in reset-names.
+	See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - edp
+- rockchip,panel: required a panel node
+
+Example:
+	edp: edp@ff970000 {
+		compatible = "rockchip,rk3288-edp";
+                reg = <0xff970000 0x4000>;
+                interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
PCLK_EDP_CTRL>, <&xin24m>; +                clock-names = "clk_edp",
"clk_edp_24m", "pclk_edp", "clk_edp_24m_parent"; +
clk_epd_24m_parent is not part of the hardware, so instead of referencing the 
target-parent as part of the device clocks, the new
	"clk: Support for clock parents and rates assigned from device tree"
should be used for setting the target parent - so the re-parenting code should 
also move out of the driver.

This commit [0] is part of the clk-pull request and thus will most likely be 
part of 3.17.


Heiko

[0] 
http://git.linaro.org/people/mike.turquette/linux.git/commitdiff/86be408bfbd846fab3c4ac21d6f9298bd2e4b790?hp=09575693a2511b5ddae0105546e0d9cefc936e34


+                rockchip,grf = <&grf>;
+                resets = <&cru 111>;
+                reset-names = "edp";
+		rockchip,panel = <&panel>;
+	};
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help