Thread (2 messages) 2 messages, 2 authors, 2016-06-17

[PATCH 00/10] meson8b clock driver rewrite/cleanup

From: khilman@baylibre.com (Kevin Hilman)
Date: 2016-06-14 19:12:50
Also in: linux-clk

Michael Turquette [off-list ref] writes:
This series came about while writing the clock driver for the AmLogic
GXBB clock controller. GXBB shares much of the same clock controller IP
as the Meson8b clock controller and the source for the drivers is very
similar. However, I wanted the GXBB driver to actually be a real
platform_driver, and not an early initcall, which led to the same
changes in the Meson8b driver. From there a lot of other changes came
about.

This series improves documentation, refactors statically initialized
data, removes unnecessary registration functions and converts the
meson8b clock controller code into a proper platform_driver. It also
changes up the Kconfig bits to prepare for the gxbb clock controller.
The diffstat is -190, which is nice as well.

As a consequence of the shift to platform_driver, all of clocks are
registered at module_init time. If any are needed very early during boot
then the OF_CLK_DECLARE stuff can be added back in, but I doubt it is
necessary.

Additionally this series makes use of some of the nice clk_hw helper
introduced by Stephen, especially clk_hw_onecell_data.
Not sure if it qualifies as much of a clock test, but I at least boot
tested this on meson8b-odroidc1 and nothing exploded, and the
clk_summary looks sane:

/ # cat /debug/clk/clk_summary
   clock                         enable_cnt  prepare_cnt        rate   accuracy   phase
   ----------------------------------------------------------------------------------------
    xtal                                     0            0    24000000   0 0
       sys_pll                               0            0  1200000000   0 0
          cpu_clk                            0            0  1200000000   0 0
       vid_pll                               0            0   732000000   0 0
       fixed_pll                             0            0  2550000000   0 0
          fclk_div7                          0            0   364285714   0 0
          fclk_div5                          0            0   510000000   0 0
          fclk_div4                          0            0   637500000   0 0
             mpeg_clk_sel                    0            0   637500000   0 0
                mpeg_clk_div                 0            0   159375000   0 0
                   clk81                     0            0   159375000   0 0
          fclk_div3                          0            0   850000000   0 0
          fclk_div2                          0            0  1275000000   0 0

Kevin
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help