Re: Issue with commit de3ef1eb1cd - PM / core: Drop run_wake flag from struct dev_pm_info [Was: MEI-related WARN_ON() triggered during resume-from-sleep on v4.13-rc2+]

On Tue, Aug 1, 2017 at 1:55 AM, Rafael J. Wysocki [off-list ref] wrote:

Hi,

On Tue, Aug 1, 2017 at 12:16 AM, Dominik Brodowski
[off-list ref] wrote:

quoted

Rafael, Mika, Bjorn and Tomas,

can't explain exactly what causes breakage between MEI and PM first seen on
v4.13-rc2 (ther was a typo in the orignal message), but I was able to bisect
it down to commit

[de3ef1eb1cd0cc3a75f7a3661e10ed827f370ab8] PM / core: Drop run_wake flag from struct dev_pm_info

[cut]

quoted

quoted

quoted

[  192.940537] Restarting tasks ...
[  192.940610] PGI is not set
[  192.940619] ------------[ cut here ]------------ [  192.940623] WARNING: CPU: 0
PID: 1661 at /home/brodo/local/kernel/git/linux/drivers/misc/mei/hw-
me.c:653 mei_me_pg_exit_sync+0x351/0x360 [  192.940624] Modules linked
in:
[  192.940627] CPU: 0 PID: 1661 Comm: kworker/0:3 Not tainted 4.13.0-rc2+
#2 [  192.940628] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11
12/08/2016 [  192.940630] Workqueue: pm pm_runtime_work <snip> [
192.940642] Call Trace:
[  192.940646]  ? pci_pme_active+0x1de/0x1f0 [  192.940649]  ?
pci_restore_standard_config+0x50/0x50
[  192.940651]  ? kfree+0x172/0x190
[  192.940653]  ? kfree+0x172/0x190
[  192.940655]  ? pci_restore_standard_config+0x50/0x50
[  192.940663]  mei_me_pm_runtime_resume+0x3f/0xc0
[  192.940665]  pci_pm_runtime_resume+0x7a/0xa0 [  192.940667]
__rpm_callback+0xb9/0x1e0 [  192.940668]  ?
preempt_count_add+0x6d/0xc0 [  192.940670]  rpm_callback+0x24/0x90 [
192.940672]  ? pci_restore_standard_config+0x50/0x50
[  192.940674]  rpm_resume+0x4e8/0x800
[  192.940676]  pm_runtime_work+0x55/0xb0 [  192.940678]
process_one_work+0x184/0x3e0 [  192.940680]  worker_thread+0x4d/0x3a0 [
192.940681]  ? preempt_count_sub+0x9b/0x100 [  192.940683]
kthread+0x122/0x140 [  192.940684]  ? process_one_work+0x3e0/0x3e0 [
192.940685]  ? __kthread_create_on_node+0x1a0/0x1a0
[  192.940688]  ret_from_fork+0x27/0x40
[  192.940690] Code: 96 3a 9e ff 48 8b 7d 98 e8 cd 21 58 00 83 bb bc 01 00 00
04 0f 85 40 fe ff ff e9 41 fe ff ff 48 c7 c7 5f 04 99 96 e8 93 6b 9f ff <0f> ff e9 5d
fd ff ff e8 33 fe 99 ff 0f 1f 00 0f 1f 44 00 00 55 [  192.940719] ---[ end trace
a86955597774ead8 ]--- [  192.942540] done.

This doesn't / didn't happen on v4.12.

By using the dynamic_debug infrastructure, I was able to obtain a few more
data points:

Running 0847684cfc5f, when suspending the system to ram and resuming again,
I see the following messages:

You have removed some relevant parts of the log, but I think I see
what's going on.

quoted

        [  614.936773] sd 3:0:0:0: [sda] Stopping disk
        [  614.956004] mei_me 0000:00:16.0: rpm: me: runtime resume

This is a runtime resume during system suspend.

quoted

        [  614.956165] ACPI : EC: event blocked
        [  614.980164] mei_me 0000:00:16.0: interrupt source 0x00000002
        [  614.980191] mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
        ...
        [  615.266896] Suspended for 1.190 seconds
        ...
        [  615.455775] sd 3:0:0:0: [sda] Starting disk
        [  615.455855] mei_me 0000:00:16.0: interrupt source 0x00000002
        [  615.455870] mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
        [  615.455877] mei_me 0000:00:16.0: we need to start the dev.

and everything works fine as expected (no WARN(), no stack trace, nothing
dubious).

Running de3ef1eb1cd0 instead, when suspending, I see *no* mei_me-related
message. During resume, the stack trace already noted above for
v4.13-rc2+ appears again:

        [   80.333909] sd 3:0:0:0: [sda] Stopping disk
        [   80.535777] psmouse serio1: Failed to disable mouse on isa0060/serio1
        [   80.983510] ACPI : EC: event blocked

Which apparently doesn't happen here.

quoted

        [   81.065510] PM: suspend of devices complete after 734.074 msecs
        ...
        [   82.137038] Restarting tasks ...
        [   82.143986] mei_me 0000:00:16.0: rpm: me: runtime resume

And which does happen here, after system resume, but then it confuses
the driver.

quoted

        [   82.143989] PGI is not set
        [   82.144001] ------------[ cut here ]------------
        [   82.144008] WARNING: CPU: 3 PID: 1881 at /home/brodo/local/kernel/git/linux/drivers/misc/mei/hw-me.c:653 mei_me_pg_exit_sync+0x351/0x360
        [   82.144009] Modules linked in:
        [   82.144012] CPU: 3 PID: 1881 Comm: kworker/3:5 Not tainted 4.12.0-rc5+ #3
        [   82.144013] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11 12/08/2016
        ...
        [   82.144017] Workqueue: pm pm_runtime_work
        [   82.144019] task: ffff964a91b35700 task.stack: ffffa51b43508000
        [   82.144022] RIP: 0010:mei_me_pg_exit_sync+0x351/0x360
        ...
        [   82.144156] ---[ end trace 5827b2fcedec4bc9 ]---
        [   82.144272] done.
        ...
        [   83.194425] mei_me 0000:00:16.0: rpm: me: runtime resume ret = -62
        [   83.194460] mei_me 0000:00:16.0: unexpected reset: dev_state = ENABLED fw status = 1E000245 6000A106 00000200 00004400 00000101 43C00ED9
        ...

Any ideas?

Can you check if the attached patch makes any difference?

Actually, I don't think it will make any difference.  Please check the
one attached this time.

Thanks,
Rafael