Re: [linux-pm] Resume from Memory very slow on 2.6.37+
From: Jeff Chua <hidden>
Date: 2011-01-18 05:19:26
On Tue, Jan 18, 2011 at 9:35 AM, Rafael J. Wysocki [off-list ref] wrote:
Do you have CONFIG_RCU_CPU_STALL_DETECTOR set? If not, please set it. Then, set CONFIG_RCU_CPU_STALL_TIMEOUT to something like 10 (in either case), run a suspend-resume cycle and see if there are any CPU stalls reported in the logs.
Configured and see nothing specific. The 30 seconds delays is indicated below in the dmesg at resume ... 2011-01-18T13:00:48.399866+08:00 boston kernel: PM: early resume of devices complete after 50.816 msecs 2011-01-18T13:00:48.399868+08:00 boston kernel: ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 2011-01-18T13:00:48.399871+08:00 boston kernel: ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 2011-01-18T13:00:48.399874+08:00 boston kernel: i915 0000:00:02.0: power state changed by ACPI to D0 2011-01-18T13:00:48.399877+08:00 boston kernel: i915 0000:00:02.0: power state changed by ACPI to D0 2011-01-18T13:00:48.399879+08:00 boston kernel: ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 2011-01-18T13:00:48.399882+08:00 boston kernel: i915 0000:00:02.0: setting latency timer to 64 2011-01-18T13:00:48.399884+08:00 boston kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64 2011-01-18T13:00:48.399887+08:00 boston kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 2011-01-18T13:00:48.399889+08:00 boston kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64 2011-01-18T13:00:48.399892+08:00 boston kernel: HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X 2011-01-18T13:00:48.399894+08:00 boston kernel: ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 2011-01-18T13:00:48.399898+08:00 boston kernel: pci 0000:00:1e.0: setting latency timer to 64 2011-01-18T13:00:48.399901+08:00 boston kernel: ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 2011-01-18T13:00:48.399904+08:00 boston kernel: ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 2011-01-18T13:00:48.399906+08:00 boston kernel: ehci_hcd 0000:00:1d.0: setting latency timer to 64 2011-01-18T13:00:48.399941+08:00 boston kernel: ahci 0000:00:1f.2: setting latency timer to 64 2011-01-18T13:00:48.399943+08:00 boston kernel: sd 0:0:0:0: [sda] Starting disk 2011-01-18T13:00:48.399946+08:00 boston kernel: ioremap error for 0xbb77e000-0xbb781000, requested 0x10, got 0x0 2011-01-18T13:00:48.399949+08:00 boston kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 2011-01-18T13:00:48.399953+08:00 boston kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded 2011-01-18T13:00:48.399955+08:00 boston kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out 2011-01-18T13:00:48.399958+08:00 boston kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out 2011-01-18T13:00:48.399961+08:00 boston kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded 2011-01-18T13:00:48.399963+08:00 boston kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out 2011-01-18T13:00:48.399966+08:00 boston kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out 2011-01-18T13:00:48.399968+08:00 boston kernel: ata1.00: configured for UDMA/100 2011-01-18T13:00:48.399970+08:00 boston kernel: ata5: SATA link down (SStatus 0 SControl 300) 2011-01-18T13:00:48.399973+08:00 boston kernel: ata6: SATA link down (SStatus 0 SControl 300) 2011-01-18T13:00:48.399975+08:00 boston kernel: PM: resume of devices complete after 407.508 msecs <============= 30 seconds delays here =============> 2011-01-18T13:00:48.399977+08:00 boston kernel: Restarting tasks ... done.
quoted
Now I have another problem which might be totally unrelated. Just realized that my notebook can't suspend to "disk" ... used to work last week. So, something has changed as well. May be someone has already reported/fixed this.Not that I know of. What do you mean by "can't suspend"?
echo platform >/sys/power/disk; echo disk >/sys/power/state Last line I see is ... "Suspending console(s) (use no_console_suspend to debug)" .. and activity after that. Thanks, Jeff -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html