[patch 08/12] Remove hot-plugged devices that could not be allocated resources

When hot-plugging an I/O hierarchy that contains many bridges
and leaf devices, it's possible that there are not enough 
resources to start all the device present. If we fail to assign
a resource, clear the corresponding value in the pci_dev structure,
so other code can take corrective action.

Signed-off-by: Rajesh Shah <redacted>
---

 linux-2.6.11-mm4-iohp-rshah1/drivers/pci/setup-bus.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletion(-)

diff -puN drivers/pci/setup-bus.c~discard_no_resource_devs drivers/pci/setup-bus.c

--- linux-2.6.11-mm4-iohp/drivers/pci/setup-bus.c~discard_no_resource_devs	2005-03-16 13:07:26.557944717 -0800
+++ linux-2.6.11-mm4-iohp-rshah1/drivers/pci/setup-bus.c	2005-03-16 13:07:26.666343153 -0800

@@ -72,7 +72,10 @@ pbus_assign_resources_sorted(struct pci_
 	for (list = head.next; list;) {
 		res = list->res;
 		idx = res - &list->dev->resource[0];
-		pci_assign_resource(list->dev, idx);
+		if (pci_assign_resource(list->dev, idx)) {
+			res->start = 0;
+			res->flags = 0;
+		}
 		tmp = list;
 		list = list->next;
 		kfree(tmp);

_