Re: ASUS M3N standby resume regression in 2.6.x -- works under 2.4.x

Hi!

OK, I have compiled 2.6.11-rc1 without USB support.

dmesg output is appended. There are some acpi related errors/warnings. 

But now, the system don't enters S1.
Upon "echo 1 > /proc/acpi/sleep" in runlevel 1, the following message is 
printed: (the ... mean I'm ommiting some figures I don't think are 
important )

Stopping tasks: ===|
------[ cut here]----
Kernel bug at drivers/pci/pci.c:330!

Hmm, I probably have broken S1... I'll check.

The system went to standby (power LED flashing, blank screen), and upon 
pressing the power button again to resume from sleep, the LCD screen 
turned on, showing the following:

   Stopping tasks: ===|
     hwsleep-0306 [78] acpi_enter_sleep_state: Entering sleep state [S1]

So, there is obviously a problem with the e100 network driver. But the 
system is locked, the keyboard does not works.

S3 doesn't work either, but never worked, even in 2.4.xx

And now, after the S3 test, at power up, my laptop starts, the fan works 
for a couple of seconds, and the laptop shuts down itself -- without 
even showing the initial bios messages!

What is the next step? A new laptop? WinXP? (sorry, but I'm not exactly 
happy)

You can always donate your laptop to me :-).

Add printks to find out what goes wrong... You may want to disable some device_suspend()
and device_resume() calls.

				Pavel
-- 
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms         



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt