RE: Power button doesn't give events (Asus TUSL2-C)

On Fri, 2003-01-10 at 19:32, Grover, Andrew wrote:

Does the output from /proc/interrupts list ACPI anywhere?

Output from cat /proc/interrupts:

           CPU0
  0:      43542    IO-APIC-edge  timer
  1:       1202    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  8:          1    IO-APIC-edge  rtc
  9:       2186   IO-APIC-level  acpi
 14:      11092    IO-APIC-edge  ide0
 15:          2    IO-APIC-edge  ide1
 16:      31845   IO-APIC-level  nvidia
 18:       5752   IO-APIC-level  EMU10K1
 19:       5836   IO-APIC-level  usb-uhci
 20:   33097143   IO-APIC-level  eth0
 21:          1   IO-APIC-level  ohci1394
 23:          7   IO-APIC-level  usb-uhci, eth1
NMI:          0
LOC:      43492
ERR:          0
MIS:          0

Does the interrupt count increase by 1 every time you press a power
button?

The interrupt count from irq 9 doesn't change when a press the power
button. It doesn't seem the change ever. On my other working systems
(which are non APIC btw) the interrupt count for the ACPI irq changes
regularly.

What does your dmesg say about discovered buttons?

[root@paragon root]# dmesg |grep Button
ACPI: Power Button (FF) [PWRF]

Hope this helps.

Cheers,

Jurgen





-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com