Re: Changing temperature trip points

On Fri, Nov 08, 2002 at 08:45:06AM +0100, Maier Gerfried wrote:

Zitiere Arndt Schoenewald [off-list ref]:

[...]

quoted

Just FYI, "on" and "off" are not the right keywords here:

    echo >/proc/acpi/fan/FAN0/state 0		turns the fan on
    echo >/proc/acpi/fan/FAN0/state 3		turns the fan off

(On my machine, though, 3 doesn't turn the fan off, but makes it run
slower and thus more quiet.)

Does this mean, that there shold be /proc/acpi/fan/... present in the latest 
acpi (kernel 2.4.20-rc1)?

Well, unfortunately I do not have it :-(
(fan-module seems to be loaded without any problems - meaning: error messages; 
acpi-debug enabled)

Yes, /proc/acpi/fan/... should be present, also in 2.4.x kernels; I had
it all the time since 2.4.18+acpi-20020329 (the first Linux+ACPI kernel
I put on my then brandnew Gericom M6-T laptop). I haven't tried kernel
2.4.20-rc1 yet, though.

Are you using the ACPI patch from http://sf.net/projects/acpi?

Of course the fan can only be controlled through ACPI if there is a fan
and it is listed correctly in the ACPI description tables. This is
typically the case for laptops and notebooks (but not for all of them),
and typically not the case for desktop machines.

Arndt


-------------------------------------------------------
This sf.net email is sponsored by: See the NEW Palm 
Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0001en