Re: disasm/compile doesn't work
From: Ducrot Bruno <hidden>
Date: 2002-10-15 09:30:15
On Mon, Oct 14, 2002 at 09:47:04PM +0100, Bob Lees wrote:
Hi This may have been asked/aired before, in which case I apologise. However here goes. I have sort of successfully disassembled/decompiled the dsdt from my evo 800c, using both pacpidump and iasl. They both produce the same outcome. By "sort of" I mean that I cannot disassemble and immdeiately recompile without errors. Some of them are basic to the compaq dsdt in that it references
It is the expected behaviour, I guess. Or you didn't have to fix your DSDT :))
*PNP???? rather than PNP????. That is easy to fix. The other problem is that objects are disassembed which have no definition. This is much harder as it is not clear how these undefined objects should be defined. Is this a common problem and does a reasonable fix exist? and if so help!
Most of the time, it is a Scope() issue. Try to see if you have something like Scope(_SB) in the middle, then replace by Scope(\_SB). Of course, this is only a 'most of the time' statement... -- Ducrot Bruno http://www.poupinou.org Page profaissionelle http://toto.tu-me-saoules.com Haume page ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf