Hi,

On Wed, Jan 22, 2014 at 3:41 PM, sanchayan maity
[off-list ref] wrote:

Hello Everyone,

I am compiling kernel image for a Toradex Colibri module which uses the
NVidia Tegra2 processor.
The device tree support and files are supplied, which i can see on the below
link.
http://lxr.free-electrons.com/source/arch/arm/boot/dts/?a=arm

The file name is tegra20-iris-512.dts which then includes
tegra20-colibri-512.dtsi.

I want to know how can i link this while doing "make" for kernel image
compilation. This is required as board config file is not present and the
device tree has to be used.

Based on my current findings, if the file name is for example exynos4.dts,
this will be specified in the config file with CONFIG_MACH_EXYNOS4_DT=y.

I want to know if this is the correct way of specifying a device tree file
for which .dtb has been generated?

The kernel version for which i am trying to do this is 3.12.6.

If your configuration supports (defconfig) DT booting for your platform you
can build .dtb by just replacing the "uImage" to "dtbs" in the command what you
used for building the uImage.

Note:- For DT booting there should be also support in the U-Boot.

Regards,
--Prabhakar Lad
http://in.linkedin.com/in/prabhakarlad