Issue with ps -l command "Unknown HZ value! (744514) Assume 100."

Hi All,


I am working on porting linux kernel 3.4 to an arm926-ejs based fpga board.


After the kernel bootup, in the command prompt when i am using the command
"ps -l "..i am getting the following

*sh-4.2# ps -l*
*Unknown HZ value! (744514) Assume 100.*
*
*
*
*
*F S   UID   PID  PPID  C PRI  NI ADDR SZ WCHAN  TTY          TIME CMD*
*0 S     0    51     1  0  80   0 -   443 wait   ttySAC0  00:00:12 sh*
*0 R     0    56    51  0  80   0 -   297 -      ttySAC0  00:00:04 ps*
*
*
*
*
The issue i am facing is *"I configured the jiffies for 25Hz,still it is
assuming 100hz."*

Is this problem related to the filesystem i am using.

I am using ".ext2"  filesystem build from buildroot.

The option set in buildroot for creating filesystem are as mentioned below:

*(3.4) linux version  *
*uClibc C library Version (uClibc 0.9.33.x)*
*Binutils Version (binutils 2.21.1)*
*GCC compiler Version (gcc 4.7.x)*


Will this issue be fixed If i use glibc nstead of uclibc in buildroot ?



Thanks,
Karthik.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20120830/4243082c/attachment.html