Is your system 32bit or 64bit?   Before putting the card, there was no
memory problem right?

And after putting in the card, memory resources all get used up right (by
IOV)?   It looked like it is similar to this problem:

http://communities.intel.com/thread/23318

From above and here:

http://www.mjmwired.net/kernel/Documentation/PCI/pci-iov-howto.txt

it seemed that this hardware feature requires BIOS support, and so if ur
hardware does not have it, SR-IOV is not possible, thus giving rise to
those errors u have seen.

On Sat, Apr 7, 2012 at 4:11 PM, J.Hwan Kim [off-list ref] wrote:

Hi, everyone

I'd like to know what routine of the PCIe allocates SR-IOV BAR memory.

When I put into the network card supporting SR-IOV in my system,
it returns error indicating "MMIO resource" is insufficient when sriov
is enabled.

The routine is in iov.c

for (i = 0; i < PCI_SRIOV_NUM_BARS/*6*/; i++) {
        res = dev->resource + PCI_IOV_RESOURCES + i;
        if (res->parent)
            nres++;
}
if (nres != iov->nres) {
      dev_err(&dev->dev, "not enough MMIO resources for SR-IOV\n");
      return -ENOMEM;
}

So, I hope to know where the resources of IOV is assigned the parent
pointer.

Thanks in advance.

Best Regards,
J.Hwan Kim


_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

-- 
Regards,
Peter Teoh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20120410/08d6124a/attachment.html