On Tue, Feb 16, 2021 at 08:37:31PM -0800, Dmitry Torokhov wrote:

Hi Dan,

On Thu, Jan 28, 2021 at 12:35:51PM +0300, Dan Carpenter wrote:

quoted

If elo_setup_10() fails then this should return an error code instead
of success.

Thank you for the patch.

quoted

Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
Signed-off-by: Dan Carpenter <redacted>
---
 drivers/input/touchscreen/elo.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index e0bacd34866a..4b2fb73da5e2 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c

@@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
 	switch (elo->id) {
 
 	case 0: /* 10-byte protocol */
-		if (elo_setup_10(elo))
+		if (elo_setup_10(elo)) {
+			err = -EINVAL;

Ideally we'd propagate error from elo_setup_10() and underlying code,
but we are not ready for it, as most serio code simply uses -1 for
errors. However I think that -EIO would suit better here. Please let me
know if you disagree, otherwise I'll fix it up on my side.

-EIO is fine.  Thanks!

regards,
dan carpenter