Thread (24 messages) flat view 24 messages, 3 authors, 2021-10-24

Re: [PATCH v2 0/5] Fun with cpp word regex

From: Ævar Arnfjörð Bjarmason <hidden>
Date: 2021-10-08 20:13:44

On Fri, Oct 08 2021, Johannes Sixt via GitGitGadget wrote:
The cpp word regex driver is a bit too loose and can match too much text
where the intent is to match only a number.

The first patch makes the cpp word regex tests more effective.

The second patch adds problematic test cases. The third patch fixes these
problems.

The final two patches add support for digit separators and the spaceship
operator <=> (generalized comparison operator).

I left out support for hexadecimal floating point constants because that
would require to tighten the regex even more to avoid that entire
expressions are treated as single tokens.

Changes since V1:

 * Tests, tests, tests.
 * Polished commit messages.
I've read this much improved v2 over, thanks a lot. This looks much
better.

Just some general comments, in my mind this is more than good enough
already and doesn't require a re-roll, just food for thought:

 * I wonder if it isn't time to split up "cpp" into a "c" driver,
   e.g. git.git's .gitattributes has "cpp" for *.[ch] files, but as C++
   adds more syntax sugar.

   So e.g. if you use "<=>" after this series we'll tokenize it
   differently in *.c files, but it's a C++-only operator, on the other
   hand probably nobody cares that much...

 * I found myself back-porting some of your tests (manually mostly),
   maybe you disagree, but in cases like 123'123, <=> etc. I'd find it
   easier to follow if we first added the test data, and then the
   changed behavior.

   Because after all, we're going to change how we highlight existing
   data, so testing for that would be informative.

 * This pre-dates your much improved tests, but these test files could
   really use some test comments, as in:

   /* Now that we're going to understand the "'" character somehow, will any of this change? */
   /* We haven't written code like this since the 1960's ... */
   /* Run & free */

   I.e. we don't just highlight code the compiler likes to eat, but also
   comments. So particularly for smaller tokens that also occur in
   natural language like "'" and "&" are we getting expected results?

   It looked like it from skimming your changes, i.e. the ' rule is
   checked by surrounding digits, just might be handy to test it ... :)
Johannes Sixt (5):
  t4034/cpp: actually test that operator tokens are not split
  t4034: add tests showing problematic cpp tokenizations
  userdiff-cpp: tighten word regex
  userdiff-cpp: permit the digit-separating single-quote in numbers
  userdiff-cpp: learn the C++ spaceship operator

 t/t4034/cpp/expect | 63 +++++++++++++++++++++++-----------------------
 t/t4034/cpp/post   | 47 +++++++++++++++++++++-------------
 t/t4034/cpp/pre    | 41 +++++++++++++++++++-----------
 userdiff.c         | 10 ++++++--
 4 files changed, 94 insertions(+), 67 deletions(-)


base-commit: 225bc32a989d7a22fa6addafd4ce7dcd04675dbf
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-1054%2Fj6t%2Ffun-with-cpp-word-regex-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-1054/j6t/fun-with-cpp-word-regex-v2
Pull-Request: https://github.com/gitgitgadget/git/pull/1054

Range-diff vs v1:

 -:  ----------- > 1:  dd9f82ba712 t4034/cpp: actually test that operator tokens are not split
 -:  ----------- > 2:  5a84fc9cf71 t4034: add tests showing problematic cpp tokenizations
 1:  a47ab9ba20e ! 3:  d4ebe45fddc userdiff: tighten cpp word regex
     @@ Metadata
      Author: Johannes Sixt [off-list ref]
      
       ## Commit message ##
     -    userdiff: tighten cpp word regex
     +    userdiff-cpp: tighten word regex
      
          Generally, word regex can be written such that they match tokens
          liberally and need not model the actual syntax because it can be assumed
     @@ Commit message
      
             .l      as in str.length
             .f      as in str.find
     +       .e      as in str.erase
      
          Tighten the regex in the following way:
      
     @@ Commit message
      
          For readability, factor hex- and binary numbers into an own term.
      
     -    As a drive-by, this fixes that floatingpoint numbers such as 12E5
     +    As a drive-by, this fixes that floating point numbers such as 12E5
          (with upper-case E) were split into two tokens.
      
          Signed-off-by: Johannes Sixt [off-list ref]
      
     + ## t/t4034/cpp/expect ##
     +@@
     + <BOLD>--- a/pre<RESET>
     + <BOLD>+++ b/post<RESET>
     + <CYAN>@@ -1,30 +1,30 @@<RESET>
     +-Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <RED>foo0<RESET><GREEN>bar<RESET>(x<RED>.f<RESET><GREEN>.F<RESET>ind); }
     ++Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <RED>foo0<RESET><GREEN>bar<RESET>(x.<RED>find<RESET><GREEN>Find<RESET>); }
     + cout<<"Hello World<RED>!<RESET><GREEN>?<RESET>\n"<<endl;
     +-<GREEN>(<RESET>1 <RED>-1e10<RESET><GREEN>+1e10<RESET> 0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>'
     ++<GREEN>(<RESET>1 <RED>-<RESET><GREEN>+<RESET>1e10 0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>'
     + // long double<RESET>
     + <RED>3.141592653e-10l<RESET><GREEN>3.141592654e+10l<RESET>
     + // float<RESET>
     +-120<RED>E5f<RESET><GREEN>E6f<RESET>
     ++<RED>120E5f<RESET><GREEN>120E6f<RESET>
     + // hex<RESET>
     +-<RED>0xdeadbeaf+8<RESET><GREEN>0xdeadBeaf+7<RESET>ULL
     ++<RED>0xdeadbeaf<RESET><GREEN>0xdeadBeaf<RESET>+<RED>8ULL<RESET><GREEN>7ULL<RESET>
     + // octal<RESET>
     + <RED>01234567<RESET><GREEN>01234560<RESET>
     + // binary<RESET>
     + <RED>0b1000<RESET><GREEN>0b1100<RESET>+e1
     + // expression<RESET>
     +-<RED>1.5-e+2+f<RESET><GREEN>1.5-e+3+f<RESET>
     ++1.5-e+<RED>2<RESET><GREEN>3<RESET>+f
     + // another one<RESET>
     +-str<RED>.e+65<RESET><GREEN>.e+75<RESET>
     +-[a] b<RED>-><RESET><GREEN>->*<RESET>v d<RED>.e<RESET><GREEN>.*e<RESET>
     ++str.e+<RED>65<RESET><GREEN>75<RESET>
     ++[a] b<RED>-><RESET><GREEN>->*<RESET>v d<RED>.<RESET><GREEN>.*<RESET>e
     + <GREEN>~<RESET>!a <GREEN>!<RESET>~b c<RED>++<RESET><GREEN>+<RESET> d<RED>--<RESET><GREEN>-<RESET> e*<GREEN>*<RESET>f g<RED>&<RESET><GREEN>&&<RESET>h
     + a<RED>*<RESET><GREEN>*=<RESET>b c<RED>/<RESET><GREEN>/=<RESET>d e<RED>%<RESET><GREEN>%=<RESET>f
     + a<RED>+<RESET><GREEN>++<RESET>b c<RED>-<RESET><GREEN>--<RESET>d
     +@@ t/t4034/cpp/expect: a<RED>==<RESET><GREEN>!=<RESET>b c<RED>!=<RESET><GREEN>=<RESET>d
     + a<RED>^<RESET><GREEN>^=<RESET>b c<RED>|<RESET><GREEN>|=<RESET>d e<RED>&&<RESET><GREEN>&=<RESET>f
     + a<RED>||<RESET><GREEN>|<RESET>b
     + a?<GREEN>:<RESET>b
     +-a<RED>=<RESET><GREEN>==<RESET>b c<RED>+=<RESET><GREEN>+<RESET>d <RED>e-=f<RESET><GREEN>e-f<RESET> g<RED>*=<RESET><GREEN>*<RESET>h i<RED>/=<RESET><GREEN>/<RESET>j k<RED>%=<RESET><GREEN>%<RESET>l m<RED><<=<RESET><GREEN><<<RESET>n o<RED>>>=<RESET><GREEN>>><RESET>p q<RED>&=<RESET><GREEN>&<RESET>r s<RED>^=<RESET><GREEN>^<RESET>t u<RED>|=<RESET><GREEN>|<RESET>v
     ++a<RED>=<RESET><GREEN>==<RESET>b c<RED>+=<RESET><GREEN>+<RESET>d e<RED>-=<RESET><GREEN>-<RESET>f g<RED>*=<RESET><GREEN>*<RESET>h i<RED>/=<RESET><GREEN>/<RESET>j k<RED>%=<RESET><GREEN>%<RESET>l m<RED><<=<RESET><GREEN><<<RESET>n o<RED>>>=<RESET><GREEN>>><RESET>p q<RED>&=<RESET><GREEN>&<RESET>r s<RED>^=<RESET><GREEN>^<RESET>t u<RED>|=<RESET><GREEN>|<RESET>v
     + a,b<RESET>
     + a<RED>::<RESET><GREEN>:<RESET>b
     +
       ## userdiff.c ##
      @@ userdiff.c: PATTERNS("cpp",
       	 /* functions/methods, variables, and compounds at top level */
 2:  9d1c05f5f41 ! 4:  dd75d19cee9 userdiff: permit the digit-separating single-quote in numbers
     @@ Metadata
      Author: Johannes Sixt [off-list ref]
      
       ## Commit message ##
     -    userdiff: permit the digit-separating single-quote in numbers
     +    userdiff-cpp: permit the digit-separating single-quote in numbers
      
          Since C++17, the single-quote can be used as digit separator:
      
     @@ Commit message
             1'000'000
             0xdead'beaf
      
     -    Make it known to the word regex of the cpp driver, so that numbers are not
     -    split into separate tokens at the single-quotes.
     +    Make it known to the word regex of the cpp driver, so that numbers are
     +    not split into separate tokens at the single-quotes.
      
          Signed-off-by: Johannes Sixt [off-list ref]
      
     + ## t/t4034/cpp/expect ##
     +@@
     + <BOLD>diff --git a/pre b/post<RESET>
     +-<BOLD>index 1229cdb..3feae6f 100644<RESET>
     ++<BOLD>index 60f3640..f6fbf7b 100644<RESET>
     + <BOLD>--- a/pre<RESET>
     + <BOLD>+++ b/post<RESET>
     + <CYAN>@@ -1,30 +1,30 @@<RESET>
     +@@ t/t4034/cpp/expect: Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <RED>foo0<RESET><GREEN>bar<RESET>
     + cout<<"Hello World<RED>!<RESET><GREEN>?<RESET>\n"<<endl;
     + <GREEN>(<RESET>1 <RED>-<RESET><GREEN>+<RESET>1e10 0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>'
     + // long double<RESET>
     +-<RED>3.141592653e-10l<RESET><GREEN>3.141592654e+10l<RESET>
     ++<RED>3.141'592'653e-10l<RESET><GREEN>3.141'592'654e+10l<RESET>
     + // float<RESET>
     + <RED>120E5f<RESET><GREEN>120E6f<RESET>
     + // hex<RESET>
     +-<RED>0xdeadbeaf<RESET><GREEN>0xdeadBeaf<RESET>+<RED>8ULL<RESET><GREEN>7ULL<RESET>
     ++<RED>0xdead'beaf<RESET><GREEN>0xdead'Beaf<RESET>+<RED>8ULL<RESET><GREEN>7ULL<RESET>
     + // octal<RESET>
     +-<RED>01234567<RESET><GREEN>01234560<RESET>
     ++<RED>0123'4567<RESET><GREEN>0123'4560<RESET>
     + // binary<RESET>
     +-<RED>0b1000<RESET><GREEN>0b1100<RESET>+e1
     ++<RED>0b10'00<RESET><GREEN>0b11'00<RESET>+e1
     + // expression<RESET>
     + 1.5-e+<RED>2<RESET><GREEN>3<RESET>+f
     + // another one<RESET>
     +
     + ## t/t4034/cpp/post ##
     +@@ t/t4034/cpp/post: Foo() : x(0&42) { bar(x.Find); }
     + cout<<"Hello World?\n"<<endl;
     + (1 +1e10 0xabcdef) 'y'
     + // long double
     +-3.141592654e+10l
     ++3.141'592'654e+10l
     + // float
     + 120E6f
     + // hex
     +-0xdeadBeaf+7ULL
     ++0xdead'Beaf+7ULL
     + // octal
     +-01234560
     ++0123'4560
     + // binary
     +-0b1100+e1
     ++0b11'00+e1
     + // expression
     + 1.5-e+3+f
     + // another one
     +
     + ## t/t4034/cpp/pre ##
     +@@ t/t4034/cpp/pre: Foo():x(0&&1){ foo0( x.find); }
     + cout<<"Hello World!\n"<<endl;
     + 1 -1e10 0xabcdef 'x'
     + // long double
     +-3.141592653e-10l
     ++3.141'592'653e-10l
     + // float
     + 120E5f
     + // hex
     +-0xdeadbeaf+8ULL
     ++0xdead'beaf+8ULL
     + // octal
     +-01234567
     ++0123'4567
     + // binary
     +-0b1000+e1
     ++0b10'00+e1
     + // expression
     + 1.5-e+2+f
     + // another one
     +
       ## userdiff.c ##
      @@ userdiff.c: PATTERNS("cpp",
       	 /* identifiers and keywords */
 3:  df66485e7f0 ! 5:  43a701f5ffd userdiff: learn the C++ spaceship operator
     @@ Metadata
      Author: Johannes Sixt [off-list ref]
      
       ## Commit message ##
     -    userdiff: learn the C++ spaceship operator
     +    userdiff-cpp: learn the C++ spaceship operator
      
     -    Since C++20, the language has a generalized comparison operator. Teach
     -    the cpp driver not to separate it into <= and > tokens.
     +    Since C++20, the language has a generalized comparison operator <=>.
     +    Teach the cpp driver not to separate it into <= and > tokens.
      
          Signed-off-by: Johannes Sixt [off-list ref]
      
     + ## t/t4034/cpp/expect ##
     +@@
     + <BOLD>diff --git a/pre b/post<RESET>
     +-<BOLD>index 60f3640..f6fbf7b 100644<RESET>
     ++<BOLD>index 144cd98..244f79c 100644<RESET>
     + <BOLD>--- a/pre<RESET>
     + <BOLD>+++ b/post<RESET>
     + <CYAN>@@ -1,30 +1,30 @@<RESET>
     +@@ t/t4034/cpp/expect: str.e+<RED>65<RESET><GREEN>75<RESET>
     + a<RED>*<RESET><GREEN>*=<RESET>b c<RED>/<RESET><GREEN>/=<RESET>d e<RED>%<RESET><GREEN>%=<RESET>f
     + a<RED>+<RESET><GREEN>++<RESET>b c<RED>-<RESET><GREEN>--<RESET>d
     + a<RED><<<RESET><GREEN><<=<RESET>b c<RED>>><RESET><GREEN>>>=<RESET>d
     +-a<RED><<RESET><GREEN><=<RESET>b c<RED><=<RESET><GREEN><<RESET>d e<RED>><RESET><GREEN>>=<RESET>f g<RED>>=<RESET><GREEN>><RESET>h
     ++a<RED><<RESET><GREEN><=<RESET>b c<RED><=<RESET><GREEN><<RESET>d e<RED>><RESET><GREEN>>=<RESET>f g<RED>>=<RESET><GREEN>><RESET>h i<RED><=<RESET><GREEN><=><RESET>j
     + a<RED>==<RESET><GREEN>!=<RESET>b c<RED>!=<RESET><GREEN>=<RESET>d
     + a<RED>^<RESET><GREEN>^=<RESET>b c<RED>|<RESET><GREEN>|=<RESET>d e<RED>&&<RESET><GREEN>&=<RESET>f
     + a<RED>||<RESET><GREEN>|<RESET>b
     +
     + ## t/t4034/cpp/post ##
     +@@ t/t4034/cpp/post: str.e+75
     + a*=b c/=d e%=f
     + a++b c--d
     + a<<=b c>>=d
     +-a<=b c<d e>=f g>h
     ++a<=b c<d e>=f g>h i<=>j
     + a!=b c=d
     + a^=b c|=d e&=f
     + a|b
     +
     + ## t/t4034/cpp/pre ##
     +@@ t/t4034/cpp/pre: str.e+65
     + a*b c/d e%f
     + a+b c-d
     + a<<b c>>d
     +-a<b c<=d e>f g>=h
     ++a<b c<=d e>f g>=h i<=j
     + a==b c!=d
     + a^b c|d e&&f
     + a||b
     +
       ## userdiff.c ##
      @@ userdiff.c: PATTERNS("cpp",
       	 "|0[xXbB][0-9a-fA-F']+[lLuU]*"
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help