Re: Train station analogy, was Re: [PATCH v3 00/15] [RFC] Upstreaming the Scalar command

Johannes Schindelin [off-list ref] writes:

Okay, let's try an analogy.

Imagine that a person is asking for directions to the train station. And
the other person is replying by asking "did you know that this train
station was built in 1878? It is actually quite interesting a story...
[and then goes on to describe the history and what excites them about
it]". Now, the first person tries again to ask for directions, again does
not get an answer to that question, and is slowly starting to look at
their watch. The second person, being completely oblivious to all of this,
goes on with their wonderful story about the train station and its
cultural heritage. So the first person walks a bit further to ask a third
person, but the second person is not done yet and says "but you haven't
heard me out! That's disrespectful!".

Just imagine for a minute how you would feel if you were the first person.

And that is how I feel asking for reviews about the Scalar patch series
and then being forcefully dragged into that tangent about the build
process.

At least to me, how this Makefile for Scalar should interact with
the overall build process does not mesh well with the story about
hwo direction to and history of the station are unrelated.  If we
plan to start from contrib/ and eventually want to make it a part
of the core Git (i.e. "git scalar <subcmd> ..." becomes just like
"git bisect <subcmd> ..."), we would eventually need to see the
recipe needed for including "bisect" and "scalar" work the same
way, no?

I am getting the impression that such a unified build process is
Ævar wants to see at the end, I am not even sure if you do from
the above "analogy".  Cool down a bit, perhaps?

The following assumes that you share the goal of making "git
scalar" just like "git bisect"---another first class citizen of
Git toolbox, the user can choose to use it or the user may not
have a need to interact with it, but it exists there by default
and is not an opt-in add-on component.

I would understand it if your plan is to convert to a unified
build procedure at the very end of the upstreaming process, and
not while you populate contrib/ with more and more scalar stuff,
because the Makefile bits for the entire scalar, while not yet
upstreamed, has already been written as a separate procedure and
having to convert the whole thing upfront before you can start
trickle parts would mean you need to (re)start the process.  And
I would even be sympathetic if you felt it like a distraction.

But at least I view it as a step that needs to happen sometime
between now and at the end.  I do not yet have an opinion on
which one is more pleasant, between (1) having to deal with a
single Makefile that needs to be aware of two different locations
*.[ch] lives in, and (2) having to deal with two Makefiles that
duplicates definitions and risks them needlessly diverging.

I also would understand it if the reason why you want to keep the
top-level Makefile as intact as possible because you sense a high
probability that scalar will stay in contrib/ and even turn out
to be a failure.  Keeping the build procedure separated certainly
will keep it easier to yank it out later.  But I do not think
such a case is quite likely.

Thanks.