[PATCH v3 1/2] test: git-stash conflict sets up rerere

Subsystems: the rest

STALE3716d

3 messages, 2 authors, 2016-06-15 · open the first message on its own page

[PATCH v3 1/2] test: git-stash conflict sets up rerere

From: Phil Hord <hidden>
Date: 2016-06-15 22:54:14

Add a failing test to confirm a conflicted stash apply
invokes rerere to record the conflicts and resolve the
the files it can.

mergetool may be confused by a left-over
state from previous rerere activity causing it to
think no files have conflicts even though they do.
This condition is not verified by this test since a
subsequent commit will change the behavior to enable
rerere for stash conflicts.

Also, the next test expected us to finish up with a reset,
which is impossible to do if we fail (as we must) and it's
an unreasonable expectation anyway.  Begin the next test
with a reset of his own instead.

Signed-off-by: Phil Hord <redacted>
---
 t/t7610-mergetool.sh | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh
index f5e16fc..725f316 100755
--- a/t/t7610-mergetool.sh
+++ b/t/t7610-mergetool.sh

@@ -55,6 +55,16 @@ test_expect_success 'setup' '
     git rm file12 &&
     git commit -m "branch1 changes" &&
 
+    git checkout -b stash1 master &&
+    echo stash1 change file11 >file11 &&
+    git add file11 &&
+    git commit -m "stash1 changes" &&
+
+    git checkout -b stash2 master &&
+    echo stash2 change file11 >file11 &&
+    git add file11 &&
+    git commit -m "stash2 changes" &&
+
     git checkout master &&
     git submodule update -N &&
     echo master updated >file1 &&

@@ -193,7 +203,35 @@ test_expect_success 'mergetool skips resolved paths when rerere is active' '
     git reset --hard
 '
 
+test_expect_failure 'conflicted stash sets up rerere'  '
+    git config rerere.enabled true &&
+    git checkout stash1 &&
+    echo "Conflicting stash content" >file11 &&
+    git stash &&
+
+    git checkout --detach stash2 &&
+    test_must_fail git stash apply &&
+
+    test -n "$(git ls-files -u)" &&
+    conflicts="$(git rerere remaining)" &&
+    test "$conflicts" = "file11" &&
+    output="$(git mergetool --no-prompt)" &&
+    test "$output" != "No files need merging" &&
+
+    git commit -am "save the stash resolution" &&
+
+    git reset --hard stash2 &&
+    test_must_fail git stash apply &&
+
+    test -n "$(git ls-files -u)" &&
+    conflicts="$(git rerere remaining)" &&
+    test -z "$conflicts" &&
+    output="$(git mergetool --no-prompt)" &&
+    test "$output" = "No files need merging"
+'
+
 test_expect_success 'mergetool takes partial path' '
+    git reset --hard
     git config rerere.enabled false &&
     git checkout -b test12 branch1 &&
     git submodule update -N &&

-- 
1.7.11.1.213.gb567ea5.dirty

[PATCH v3 2/2] stash: invoke rerere in case of conflict

From: Phil Hord <hidden>
Date: 2016-06-15 22:54:14

'stash apply' directly calls a backend merge function
which does not automatically invoke rerere.  This
confuses mergetool when leftover rerere state is left
behind from previous merges.

Invoke rerere explicitly when we encounter a conflict
during stash apply

Change the test for this flaw to expect success.

Signed-off-by: Phil Hord <redacted>
Mentored-by: Junio C Hamano [off-list ref]
---
 git-stash.sh         | 1 +
 t/t7610-mergetool.sh | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/git-stash.sh b/git-stash.sh
index 4e2c7f8..bbefdf6 100755
--- a/git-stash.sh
+++ b/git-stash.sh

@@ -469,6 +469,7 @@ apply_stash () {
 	else
 		# Merge conflict; keep the exit status from merge-recursive
 		status=$?
+		git rerere
 		if test -n "$INDEX_OPTION"
 		then
 			gettextln "Index was not unstashed." >&2

diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh
index 725f316..6fa0c70 100755
--- a/t/t7610-mergetool.sh
+++ b/t/t7610-mergetool.sh

@@ -203,7 +203,7 @@ test_expect_success 'mergetool skips resolved paths when rerere is active' '
     git reset --hard
 '
 
-test_expect_failure 'conflicted stash sets up rerere'  '
+test_expect_success 'conflicted stash sets up rerere'  '
     git config rerere.enabled true &&
     git checkout stash1 &&
     echo "Conflicting stash content" >file11 &&

-- 
1.7.11.1.213.gb567ea5.dirty

Re: [PATCH v3 1/2] test: git-stash conflict sets up rerere

From: Junio C Hamano <hidden>
Date: 2016-06-15 22:54:30

Phil Hord [off-list ref] writes:

quoted hunk

Add a failing test to confirm a conflicted stash apply
invokes rerere to record the conflicts and resolve the
the files it can.

mergetool may be confused by a left-over
state from previous rerere activity causing it to
think no files have conflicts even though they do.
This condition is not verified by this test since a
subsequent commit will change the behavior to enable
rerere for stash conflicts.

Also, the next test expected us to finish up with a reset,
which is impossible to do if we fail (as we must) and it's
an unreasonable expectation anyway.  Begin the next test
with a reset of his own instead.

Signed-off-by: Phil Hord <redacted>
---
 t/t7610-mergetool.sh | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh
index f5e16fc..725f316 100755
--- a/t/t7610-mergetool.sh
+++ b/t/t7610-mergetool.sh

...
 test_expect_success 'mergetool takes partial path' '
+    git reset --hard

I'll add " &&" at the end and queue.  Thanks.

     git config rerere.enabled false &&
     git checkout -b test12 branch1 &&
     git submodule update -N &&

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help