[PATCH v2 1/8] net/bonding: fix typos and whitespace

@@ -630,8 +630,8 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"set bonding mac_addr (port_id) (address)\n"
 			"	Set the MAC address of a bonded device.\n\n"
 
-			"set bonding mode IEEE802.3AD aggregator policy (port_id) (agg_name)"
-			"	Set Aggregation mode for IEEE802.3AD (mode 4)"
+			"set bonding mode IEEE802.3AD aggregator policy (port_id) (agg_name)\n"
+			"	Set Aggregation mode for IEEE802.3AD (mode 4)\n\n"
 
 			"set bonding balance_xmit_policy (port_id) (l2|l23|l34)\n"
 			"	Set the transmit balance policy for bonded device running in balance mode.\n\n"

@@ -58,11 +58,11 @@ static const struct rte_ether_addr slave_mac_default = {
 	{ 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00 }
 };
 
-static const struct rte_ether_addr parnter_mac_default = {
+static const struct rte_ether_addr partner_mac_default = {
 	{ 0x22, 0xBB, 0xFF, 0xBB, 0x00, 0x00 }
 };
 
-static const struct rte_ether_addr parnter_system = {
+static const struct rte_ether_addr partner_system = {
 	{ 0x33, 0xFF, 0xBB, 0xFF, 0x00, 0x00 }
 };
 

@@ -76,7 +76,7 @@ struct slave_conf {
 	uint16_t port_id;
 	uint8_t bonded : 1;
 
-	uint8_t lacp_parnter_state;
+	uint8_t lacp_partner_state;
 };
 
 struct ether_vlan_hdr {

@@ -258,7 +258,7 @@ add_slave(struct slave_conf *slave, uint8_t start)
 	TEST_ASSERT_EQUAL(rte_is_same_ether_addr(&addr, &addr_check), 1,
 			"Slave MAC address is not as expected");
 
-	RTE_VERIFY(slave->lacp_parnter_state == 0);
+	RTE_VERIFY(slave->lacp_partner_state == 0);
 	return 0;
 }
 

@@ -288,7 +288,7 @@ remove_slave(struct slave_conf *slave)
 			test_params.bonded_port_id);
 
 	slave->bonded = 0;
-	slave->lacp_parnter_state = 0;
+	slave->lacp_partner_state = 0;
 	return 0;
 }
 

@@ -501,20 +501,20 @@ make_lacp_reply(struct slave_conf *slave, struct rte_mbuf *pkt)
 	slow_hdr = rte_pktmbuf_mtod(pkt, struct slow_protocol_frame *);
 
 	/* Change source address to partner address */
-	rte_ether_addr_copy(&parnter_mac_default, &slow_hdr->eth_hdr.src_addr);
+	rte_ether_addr_copy(&partner_mac_default, &slow_hdr->eth_hdr.src_addr);
 	slow_hdr->eth_hdr.src_addr.addr_bytes[RTE_ETHER_ADDR_LEN - 1] =
 		slave->port_id;
 
 	lacp = (struct lacpdu *) &slow_hdr->slow_protocol;
 	/* Save last received state */
-	slave->lacp_parnter_state = lacp->actor.state;
+	slave->lacp_partner_state = lacp->actor.state;
 	/* Change it into LACP replay by matching parameters. */
 	memcpy(&lacp->partner.port_params, &lacp->actor.port_params,
 		sizeof(struct port_params));
 
 	lacp->partner.state = lacp->actor.state;
 
-	rte_ether_addr_copy(&parnter_system, &lacp->actor.port_params.system);
+	rte_ether_addr_copy(&partner_system, &lacp->actor.port_params.system);
 	lacp->actor.state = STATE_LACP_ACTIVE |
 						STATE_SYNCHRONIZATION |
 						STATE_AGGREGATION |

@@ -580,7 +580,7 @@ bond_handshake_done(struct slave_conf *slave)
 	const uint8_t expected_state = STATE_LACP_ACTIVE | STATE_SYNCHRONIZATION |
 			STATE_AGGREGATION | STATE_COLLECTING | STATE_DISTRIBUTING;
 
-	return slave->lacp_parnter_state == expected_state;
+	return slave->lacp_partner_state == expected_state;
 }
 
 static unsigned

@@ -1165,7 +1165,7 @@ init_marker(struct rte_mbuf *pkt, struct slave_conf *slave)
 			&marker_hdr->eth_hdr.dst_addr);
 
 	/* Init source address */
-	rte_ether_addr_copy(&parnter_mac_default,
+	rte_ether_addr_copy(&partner_mac_default,
 			&marker_hdr->eth_hdr.src_addr);
 	marker_hdr->eth_hdr.src_addr.addr_bytes[RTE_ETHER_ADDR_LEN - 1] =
 		slave->port_id;

@@ -1353,7 +1353,7 @@ test_mode4_expired(void)
 	/* After test only expected slave should be in EXPIRED state */
 	FOR_EACH_SLAVE(i, slave) {
 		if (slave == exp_slave)
-			TEST_ASSERT(slave->lacp_parnter_state & STATE_EXPIRED,
+			TEST_ASSERT(slave->lacp_partner_state & STATE_EXPIRED,
 				"Slave %u should be in expired.", slave->port_id);
 		else
 			TEST_ASSERT_EQUAL(bond_handshake_done(slave), 1,

@@ -1392,7 +1392,7 @@ test_mode4_ext_ctrl(void)
 		},
 	};
 
-	rte_ether_addr_copy(&parnter_system, &src_mac);
+	rte_ether_addr_copy(&partner_system, &src_mac);
 	rte_ether_addr_copy(&slow_protocol_mac_addr, &dst_mac);
 
 	initialize_eth_header(&lacpdu.eth_hdr, &src_mac, &dst_mac,

@@ -1446,7 +1446,7 @@ test_mode4_ext_lacp(void)
 		},
 	};
 
-	rte_ether_addr_copy(&parnter_system, &src_mac);
+	rte_ether_addr_copy(&partner_system, &src_mac);
 	rte_ether_addr_copy(&slow_protocol_mac_addr, &dst_mac);
 
 	initialize_eth_header(&lacpdu.eth_hdr, &src_mac, &dst_mac,

@@ -1535,7 +1535,7 @@ check_environment(void)
 		if (port->bonded != 0)
 			env_state |= 0x04;
 
-		if (port->lacp_parnter_state != 0)
+		if (port->lacp_partner_state != 0)
 			env_state |= 0x08;
 
 		if (env_state != 0)

@@ -15,12 +15,12 @@
 #include "rte_eth_bond_8023ad.h"
 
 #define BOND_MODE_8023AX_UPDATE_TIMEOUT_MS  100
-/** Maximum number of packets to one slave queued in TX ring. */
+/** Maximum number of packets to one slave queued in RX ring. */
 #define BOND_MODE_8023AX_SLAVE_RX_PKTS        3
 /** Maximum number of LACP packets from one slave queued in TX ring. */
 #define BOND_MODE_8023AX_SLAVE_TX_PKTS        1
 /**
- * Timeouts deffinitions (5.4.4 in 802.1AX documentation).
+ * Timeouts definitions (6.4.4 in 802.1AX documentation).
  */
 #define BOND_8023AD_FAST_PERIODIC_MS                900
 #define BOND_8023AD_SLOW_PERIODIC_MS              29000

@@ -34,7 +34,7 @@
 /**
  * Interval of showing warning message from state machines. All messages will
  * be held (and gathered together) to prevent flooding.
- * This is no parto of 802.1AX standard.
+ * This is not part of 802.1AX standard.
  */
 #define BOND_8023AD_WARNINGS_PERIOD_MS             1000
 

@@ -83,7 +83,7 @@
 #define PARTNER_STATE_SET(_p, _f) SET_FLAGS((_p)->partner_state, STATE_ ## _f)
 #define PARTNER_STATE_CLR(_p, _f) CLEAR_FLAGS((_p)->partner_state, STATE_ ## _f)
 
-/** Variables associated with each port (5.4.7 in 802.1AX documentation). */
+/** Variables associated with each port (6.4.7 in 802.1AX documentation). */
 struct port {
 	/**
 	 * The operational values of the Actor's state parameters. Bitmask

@@ -124,7 +124,7 @@ struct port {
 	uint64_t wait_while_timer;
 	uint64_t tx_machine_timer;
 	uint64_t tx_marker_timer;
-	/* Agregator parameters */
+	/* Aggregator parameters */
 	/** Used aggregator port ID */
 	uint16_t aggregator_port_id;
 

@@ -280,7 +280,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *dev, uint16_t port_id);
 /**
  * @internal
  *
- * Denitializes and removes given slave from 802.1AX mode.
+ * Deinitializes and removes given slave from 802.1AX mode.
  *
  * @param dev       Bonded interface.
  * @param slave_num Position of slave in active_slaves array

@@ -207,15 +207,15 @@ show_warnings(uint16_t slave_id)
 	if (warnings & WRN_RX_QUEUE_FULL) {
 		RTE_BOND_LOG(DEBUG,
 			     "Slave %u: failed to enqueue LACP packet into RX ring.\n"
-			     "Receive and transmit functions must be invoked on bonded"
-			     "interface at least 10 times per second or LACP will notwork correctly",
+			     "Receive and transmit functions must be invoked on bonded\n"
+			     "interface at least 10 times per second or LACP will not work correctly",
 			     slave_id);
 	}
 
 	if (warnings & WRN_TX_QUEUE_FULL) {
 		RTE_BOND_LOG(DEBUG,
 			     "Slave %u: failed to enqueue LACP packet into TX ring.\n"
-			     "Receive and transmit functions must be invoked on bonded"
+			     "Receive and transmit functions must be invoked on bonded\n"
 			     "interface at least 10 times per second or LACP will not work correctly",
 			     slave_id);
 	}

@@ -250,7 +250,7 @@ record_default(struct port *port)
 
 /** Function handles rx state machine.
  *
- * This function implements Receive State Machine from point 5.4.12 in
+ * This function implements Receive State Machine from point 6.4.12 in
  * 802.1AX documentation. It should be called periodically.
  *
  * @param lacpdu		LACPDU received.

@@ -384,7 +384,7 @@ rx_machine(struct bond_dev_private *internals, uint16_t slave_id,
 /**
  * Function handles periodic tx state machine.
  *
- * Function implements Periodic Transmission state machine from point 5.4.13
+ * Function implements Periodic Transmission state machine from point 6.4.13
  * in 802.1AX documentation. It should be called periodically.
  *
  * @param port			Port to handle state machine.

@@ -446,7 +446,7 @@ periodic_machine(struct bond_dev_private *internals, uint16_t slave_id)
 /**
  * Function handles mux state machine.
  *
- * Function implements Mux Machine from point 5.4.15 in 802.1AX documentation.
+ * Function implements Mux Machine from point 6.4.15 in 802.1AX documentation.
  * It should be called periodically.
  *
  * @param port			Port to handle state machine.

@@ -549,7 +549,7 @@ mux_machine(struct bond_dev_private *internals, uint16_t slave_id)
 /**
  * Function handles transmit state machine.
  *
- * Function implements Transmit Machine from point 5.4.16 in 802.1AX
+ * Function implements Transmit Machine from point 6.4.16 in 802.1AX
  * documentation.
  *
  * @param port

@@ -1051,14 +1051,14 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
 	struct bond_tx_queue *bd_tx_q;
 	uint16_t q_id;
 
-	/* Given slave mus not be in active list */
+	/* Given slave must not be in active list. */
 	RTE_ASSERT(find_slave_by_id(internals->active_slaves,
 	internals->active_slave_count, slave_id) == internals->active_slave_count);
 	RTE_SET_USED(internals); /* used only for assert when enabled */
 
 	memcpy(&port->actor, &initial, sizeof(struct port_params));
-	/* Standard requires that port ID must be grater than 0.
-	 * Add 1 do get corresponding port_number */
+	/* Standard requires that port ID must be greater than 0.
+	 * Add 1 to get corresponding port_number. */
 	port->actor.port_number = rte_cpu_to_be_16(slave_id + 1);
 
 	memcpy(&port->partner, &initial, sizeof(struct port_params));

@@ -1069,7 +1069,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
 	port->partner_state = STATE_LACP_ACTIVE | STATE_AGGREGATION;
 	port->sm_flags = SM_FLAGS_BEGIN;
 
-	/* use this port as agregator */
+	/* Use this port as aggregator. */
 	port->aggregator_port_id = slave_id;
 
 	if (bond_mode_8023ad_register_lacp_mac(slave_id) < 0) {

@@ -68,7 +68,7 @@ struct port_params {
 	struct rte_ether_addr system;
 	/**< System ID - Slave MAC address, same as bonding MAC address */
 	uint16_t key;
-	/**< Speed information (implementation dependednt) and duplex. */
+	/**< Speed information (implementation dependent) and duplex. */
 	uint16_t port_priority;
 	/**< Priority of this (unused in current implementation) */
 	uint16_t port_number;

@@ -83,7 +83,7 @@ struct lacpdu_actor_partner_params {
 	uint8_t reserved_3[3];
 } __rte_packed __rte_aligned(2);
 
-/** LACPDU structure (5.4.2 in 802.1AX documentation). */
+/** LACPDU structure (6.4.2 in 802.1AX documentation). */
 struct lacpdu {
 	uint8_t subtype;
 	uint8_t version_number;

@@ -153,7 +153,7 @@ struct rte_eth_bond_8023ad_slave_info {
 /**
  * @internal
  *
- * Function returns current configuration of 802.3AX mode.
+ * Function returns current configuration of 802.1AX mode.
  *
  * @param port_id   Bonding device id
  * @param conf		Pointer to timeout structure.

@@ -197,10 +197,6 @@ int
 rte_eth_bond_8023ad_slave_info(uint16_t port_id, uint16_t slave_id,
 		struct rte_eth_bond_8023ad_slave_info *conf);
 
-#ifdef __cplusplus
-}
-#endif
-
 /**
  * Configure a slave port to start collecting.
  *

@@ -331,4 +327,9 @@ rte_eth_bond_8023ad_agg_selection_get(uint16_t port_id);
 int
 rte_eth_bond_8023ad_agg_selection_set(uint16_t port_id,
 		enum rte_bond_8023ad_agg_selection agg_selection);
+
+#ifdef __cplusplus
+}
+#endif
+
 #endif /* RTE_ETH_BOND_8023AD_H_ */

@@ -158,7 +158,8 @@ const struct rte_flow_attr flow_attr_8023ad = {
 
 int
 bond_ethdev_8023ad_flow_verify(struct rte_eth_dev *bond_dev,
-		uint16_t slave_port) {
+		uint16_t slave_port)
+{
 	struct rte_eth_dev_info slave_info;
 	struct rte_flow_error error;
 	struct bond_dev_private *internals = bond_dev->data->dev_private;

@@ -207,7 +208,8 @@ bond_ethdev_8023ad_flow_verify(struct rte_eth_dev *bond_dev,
 }
 
 int
-bond_8023ad_slow_pkt_hw_filter_supported(uint16_t port_id) {
+bond_8023ad_slow_pkt_hw_filter_supported(uint16_t port_id)
+{
 	struct rte_eth_dev *bond_dev = &rte_eth_devices[port_id];
 	struct bond_dev_private *internals = bond_dev->data->dev_private;
 	struct rte_eth_dev_info bond_info;

@@ -240,8 +242,8 @@ bond_8023ad_slow_pkt_hw_filter_supported(uint16_t port_id) {
 }
 
 int
-bond_ethdev_8023ad_flow_set(struct rte_eth_dev *bond_dev, uint16_t slave_port) {
-
+bond_ethdev_8023ad_flow_set(struct rte_eth_dev *bond_dev, uint16_t slave_port)
+{
 	struct rte_flow_error error;
 	struct bond_dev_private *internals = bond_dev->data->dev_private;
 	struct rte_flow_action_queue lacp_queue_conf = {

@@ -809,7 +811,8 @@ struct bwg_slave {
 };
 
 void
-bond_tlb_activate_slave(struct bond_dev_private *internals) {
+bond_tlb_activate_slave(struct bond_dev_private *internals)
+{
 	int i;
 
 	for (i = 0; i < internals->active_slave_count; i++) {