Add inner packet IPv4 hdr and L4 checksum enable options
in conf. These will be used in case of protocol offload.
Per SA, application could specify whether the
checksum(compute/verify) can be offloaded to security device.

Signed-off-by: Archana Muniganti <redacted>
---
 doc/guides/cryptodevs/features/default.ini |  1 +
 doc/guides/rel_notes/deprecation.rst       |  4 ++--
 doc/guides/rel_notes/release_21_11.rst     |  4 ++++
 lib/cryptodev/rte_cryptodev.h              |  2 ++
 lib/security/rte_security.h                | 18 ++++++++++++++++++
 5 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/doc/guides/cryptodevs/features/default.ini b/doc/guides/cryptodevs/features/default.ini
index c24814de98..96d95ddc81 100644
--- a/doc/guides/cryptodevs/features/default.ini
+++ b/doc/guides/cryptodevs/features/default.ini

@@ -33,6 +33,7 @@ Non-Byte aligned data  =
 Sym raw data path API  =
 Cipher multiple data units =
 Cipher wrapped key     =
+Inner checksum         =

 ;
 ; Supported crypto algorithms of a default crypto driver.

diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 05fc2fdee7..8308e00ed4 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst

@@ -232,8 +232,8 @@ Deprecation Notices
   IPsec payload MSS (Maximum Segment Size), and ESN (Extended Sequence Number).

 * security: The IPsec SA config options ``struct rte_security_ipsec_sa_options``
-  will be updated with new fields to support new features like IPsec inner
-  checksum, TSO in case of protocol offload.
+  will be updated with new fields to support new features like TSO in case of
+  protocol offload.

 * ipsec: The structure ``rte_ipsec_sa_prm`` will be extended with a new field
   ``hdr_l3_len`` to configure tunnel L3 header length.

diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index 8da851cccc..93d1b36889 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst

@@ -194,6 +194,10 @@ ABI Changes
   ``rte_security_ipsec_xform`` to allow applications to configure SA soft
   and hard expiry limits. Limits can be either in number of packets or bytes.

+* security: The new options ``ip_csum_enable`` and ``l4_csum_enable`` were added
+  in structure ``rte_security_ipsec_sa_options`` to indicate whether inner
+  packet IPv4 header checksum and L4 checksum need to be offloaded to
+  security device.

 Known Issues
 ------------

diff --git a/lib/cryptodev/rte_cryptodev.h b/lib/cryptodev/rte_cryptodev.h
index bb01f0f195..d9271a6c45 100644
--- a/lib/cryptodev/rte_cryptodev.h
+++ b/lib/cryptodev/rte_cryptodev.h

@@ -479,6 +479,8 @@ rte_cryptodev_asym_get_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
 /**< Support operations on multiple data-units message */
 #define RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY		(1ULL << 26)
 /**< Support wrapped key in cipher xform  */
+#define RTE_CRYPTODEV_FF_SECURITY_INNER_CSUM		(1ULL << 27)
+/**< Support inner checksum computation/verification */

 /**
  * Get the name of a crypto device feature flag

diff --git a/lib/security/rte_security.h b/lib/security/rte_security.h
index ab1a6e1f65..945f45ad76 100644
--- a/lib/security/rte_security.h
+++ b/lib/security/rte_security.h

@@ -230,6 +230,24 @@ struct rte_security_ipsec_sa_options {
 	 * * 0: Do not match UDP ports
 	 */
 	uint32_t udp_ports_verify : 1;
+
+	/** Compute/verify inner packet IPv4 header checksum in tunnel mode
+	 *
+	 * * 1: For outbound, compute inner packet IPv4 header checksum
+	 *      before tunnel encapsulation and for inbound, verify after
+	 *      tunnel decapsulation.
+	 * * 0: Inner packet IP header checksum is not computed/verified.
+	 */
+	uint32_t ip_csum_enable : 1;
+
+	/** Compute/verify inner packet L4 checksum in tunnel mode
+	 *
+	 * * 1: For outbound, compute inner packet L4 checksum before
+	 *      tunnel encapsulation and for inbound, verify after
+	 *      tunnel decapsulation.
+	 * * 0: Inner packet L4 checksum is not computed/verified.
+	 */
+	uint32_t l4_csum_enable : 1;