25/03/2021 18:10, Ferruh Yigit:

On 3/9/2021 1:18 PM, Jiawei Wang wrote:

quoted

Update documentation for sample action usage in testpmd and
show the command line example.

+1 to document this.

Indeed for all testpmd flow update, it must be mandatory to update "Flow rules 
management" section for it, Ori what do you think?

quoted

Signed-off-by: Jiawei Wang <redacted>
Acked-by: Viacheslav Ovsiienko <redacted>

<...>

quoted

+Sample Sampling/Mirroring rules
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Sample/Mirroring rules can be set by the following commands
+
+NIC-RX Sampling rule, the matched ingress packets are duplicated and sent to
+the queue 1, and each second packets are marked with 0x1234 and sent to
+queue 0.
+

Also each second packets duplicated to queue 1, isn't it, because of 'ratio 2'?

quoted

+::
+
+ testpmd> set sample_actions 0 mark id  0x1234 / queue index 0 / end
+ testpmd> flow create 0 ingress group 1 pattern eth / end actions
+        sample ratio 2 index 0 / queue index 1 / end
+
+E-Switch Sampling rule, the matched ingress packets are duplicated and sent
+to port id 2, and each second packets are sent to eswitch manager.
+

what is 'E-Switch', or "eswitch manager", isn't the mirror rule generic?

This is the HW switch in Mellanox devices.
It should not be mentioned in this generic doc.