-----Original Message-----
From: oulijun <redacted>
Sent: Tuesday, March 23, 2021 22:19
To: Li, Xiaoyun <redacted>; Yigit, Ferruh <redacted>
Cc: dev@dpdk.org; linuxarm@openeuler.org
Subject: Re: [PATCH 1/3] app/testpmd: fix forwarding configuration when DCB
test

<snip>

quoted

quoted

@@ -2707,14 +2707,16 @@ stop_port(portid_t pid)
  	portid_t peer_pl[RTE_MAX_ETHPORTS];
  	int peer_pi;

-	if (dcb_test) {
-		dcb_test = 0;
-		dcb_config = 0;
-	}
-
  	if (port_id_is_invalid(pid, ENABLED_WARN))
  		return;

+	/*
+	 * In "start_port" function, dcb_test is set to 1 based on dcb_config.
+	 * So it should be cleared when dcb_config is 0.
+	 */
+	if (dcb_config == 0)
+		dcb_test = 0;
+

I don't understand why are you changing this.
dcb_test will only be set when dcb_config is 1 when starting ports. And both

dcb_test and dcb_config will be cleared when stopping ports.

quoted

So dcb will only affect when you set port dcb and then start port and when

stop port dcb will be cleared.

quoted

Yes, I think. The forwarding streams should not be changed from
"dcb_fwd_config_setup" to "rss_fwd_config_setup" after dcb info is configured.
But, now, the logical codes do it when stopping ports and then starting ports.

quoted

So what's the problem of original codes?

Your change will cause issues that there's no place to set dcb_config as 0. If

you config dcb, then it'll be always dcb mode unless restart the whole testpmd.

quoted

As far as I know, the current testpmd only supports switching from the
normal mode to the dcb mode, but does not support the reverse operation.
And " dcb_config" is set to 1, and then "dcb_test" is set to 1 after
config.

You're not answering my questions. Why are you changing the behavior of testpmd?
Your change will make testpmd stay dcb mode once set dcb mode and can't go back to normal mode. If users want to go back to normal mode, he/she has to restart the whole testpmd.

It worked as you can set dcb mode and start port. After stopping port, if you still want dcb mode, you need to set dcb mode command again. But at least the old way won't break anything.
@Yigit, Ferruh Not sure which behavior is better, what do you think?

And @oulijun can you just answer all comments in one thread?

quoted

quoted

  	printf("Stopping ports...\n");

  	RTE_ETH_FOREACH_DEV(pi) {
--
2.7.4

.