Thread (1 message) 1 message, 1 author, 2017-10-11

Re: [PATCH] net/ixgbe: fix Rx queue interrupt mapping in VF

From: Dai, Wei <hidden>
Date: 2017-10-11 07:10:24

I look through from web browser and not find following mail from Jianwei Ma [off-list ref]
Hope this can add his test result in the mail list to community.
-----Original Message-----
From: Ma, Jianwei
Sent: Tuesday, October 10, 2017 4:48 PM
To: Dai, Wei <redacted>; Lu, Wenzhuo <redacted>;
Ananyev, Konstantin [off-list ref]
Cc: dev@dpdk.org; stable@dpdk.org
Subject: RE: [PATCH] net/ixgbe: fix Rx queue interrupt mapping in VF

Verified with l3fwd-power. It worked well with this patch plus
http://dpdk.org/dev/patchwork/patch/29221/  "[dpdk-dev,v2] net/ixgbe:
fix VFIO interrupt mapping in VF"

-----Original Message-----
From: Dai, Wei
Sent: Tuesday, October 10, 2017 11:26
To: Lu, Wenzhuo <redacted>; Ananyev, Konstantin
[off-list ref]; Ma, Jianwei [off-list ref]
Cc: dev@dpdk.org; stable@dpdk.org
Subject: RE: [PATCH] net/ixgbe: fix Rx queue interrupt mapping in VF

Hi, Jianwei
How about your test result ?

Hi, Wenzhuo
Would you please review this patch ?

Thanks a lot !
quoted
-----Original Message-----
From: Dai, Wei
Sent: Wednesday, September 20, 2017 6:18 PM
To: Lu, Wenzhuo <redacted>; Ananyev, Konstantin
[off-list ref]
Cc: dev@dpdk.org; Dai, Wei <redacted>; stable@dpdk.org
Subject: [PATCH] net/ixgbe: fix Rx queue interrupt mapping in VF

When a VF port is bound to VFIO-PCI, miscellaneous interrupt is mapped
to MSI-X vector 0 and Rx queues interrupt are mapped to other vectors
in vfio_enable_msix( ). To simplify implementation, all VFIO-PCI bound
ixgbe VF Rx queue interrupts can be mapped in vector 1. And as current
igb_uio only support only one vector, ixgbe VF PMD should use vector 0
for igb_uio and vector 1 for VFIO-PCI. Without this patch, VF Rx queue
interrupt is mapped to vector 0 in register settings and mapped to
VFIO vector 1 in vfio_enable_msix( ), and then all Rx queue interrupts will
be missed.
quoted
Fixes: b13bfab4cdbe ("eal: reserve VFIO vector zero for misc
interrupt")
Cc: stable@dpdk.org

Signed-off-by: Wei Dai <redacted>
Tested-by: Jianwei Ma <redacted>
quoted
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
b/drivers/net/ixgbe/ixgbe_ethdev.c
index 9ca5cbc..39a3d8c 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -5029,7 +5029,10 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)

 	/* check and configure queue intr-vector mapping */
 	if (dev->data->dev_conf.intr_conf.rxq != 0) {
-		intr_vector = dev->data->nb_rx_queues;
+		/* According to datasheet, only vector 0/1/2 can be used,
+		 * now only one vector is used for Rx queue
+		 */
+		intr_vector = 1;
 		if (rte_intr_efd_enable(intr_handle, intr_vector))
 			return -1;
 	}
@@ -5556,9 +5559,12 @@ ixgbevf_dev_rx_queue_intr_enable(struct
rte_eth_dev *dev, uint16_t queue_id)
 	uint32_t mask;
 	struct ixgbe_hw *hw =
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t vec = IXGBE_MISC_VEC_ID;

 	mask = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
-	mask |= (1 << IXGBE_MISC_VEC_ID);
+	if (rte_intr_allow_others(intr_handle))
+		vec = IXGBE_RX_VEC_START;
+	mask |= (1 << vec);
 	RTE_SET_USED(queue_id);
 	IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
@@ -5573,9 +5579,14 @@ ixgbevf_dev_rx_queue_intr_disable(struct
rte_eth_dev *dev, uint16_t queue_id)
 	uint32_t mask;
 	struct ixgbe_hw *hw =
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+	uint32_t vec = IXGBE_MISC_VEC_ID;

 	mask = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
-	mask &= ~(1 << IXGBE_MISC_VEC_ID);
+	if (rte_intr_allow_others(intr_handle))
+		vec = IXGBE_RX_VEC_START;
+	mask &= ~(1 << vec);
 	RTE_SET_USED(queue_id);
 	IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
@@ -5717,6 +5728,7 @@ ixgbevf_configure_msix(struct rte_eth_dev
*dev)
quoted
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	uint32_t q_idx;
 	uint32_t vector_idx = IXGBE_MISC_VEC_ID;
+	uint32_t base = IXGBE_MISC_VEC_ID;

 	/* Configure VF other cause ivar */
 	ixgbevf_set_ivar_map(hw, -1, 1, vector_idx); @@ -5727,6 +5739,11
@@
quoted
ixgbevf_configure_msix(struct rte_eth_dev *dev)
 	if (!rte_intr_dp_is_en(intr_handle))
 		return;

+	if (rte_intr_allow_others(intr_handle)) {
+		base = IXGBE_RX_VEC_START;
+		vector_idx = IXGBE_RX_VEC_START;
+	}
+
 	/* Configure all RX queues of VF */
 	for (q_idx = 0; q_idx < dev->data->nb_rx_queues; q_idx++) {
 		/* Force all queue use vector 0,
@@ -5734,6 +5751,8 @@ ixgbevf_configure_msix(struct rte_eth_dev
*dev)
quoted
 		 */
 		ixgbevf_set_ivar_map(hw, 0, q_idx, vector_idx);
 		intr_handle->intr_vec[q_idx] = vector_idx;
+		if (vector_idx < base + intr_handle->nb_efd - 1)
+			vector_idx++;
 	}
 }

--
2.7.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help