[PATCH 4/4] doc: update dpaa2 PMD document
From: Hemant Agrawal <hidden>
Date: 2017-07-24 07:24:00
Subsystem:
the rest · Maintainer:
Linus Torvalds
added features, limitations and copyright. Signed-off-by: Hemant Agrawal <redacted> --- doc/guides/nics/dpaa2.rst | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst
index 6965121..207962e 100644
--- a/doc/guides/nics/dpaa2.rst
+++ b/doc/guides/nics/dpaa2.rst@@ -1,6 +1,5 @@ .. BSD LICENSE - Copyright (C) NXP. 2016. - All rights reserved. + Copyright 2016 NXP. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions
@@ -423,9 +422,15 @@ Features of the DPAA2 PMD are: - Multiple queues for TX and RX - Receive Side Scaling (RSS) +- MAC/VLAN filtering - Packet type information - Checksum offload - Promiscuous mode +- Multicast mode +- Port hardware statistics +- Jumbo frames +- Link flow control +- Scattered and gather for TX and RX Supported DPAA2 SoCs --------------------
@@ -592,3 +597,10 @@ The DPAA2 SoC family support a maximum of a 10240 jumbo frame. The value is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len`` member of ``struct rte_eth_conf`` is set to a value lower than 10240, frames up to 10240 bytes can still reach the host interface. + +Other Limitations +~~~~~~~~~~~~~~~~~ + +- RSS hash key cannot be modified. +- RSS RETA cannot be configured. +- Secondary process packet I/O is not supported.
--
2.7.4