The PHY type value for unrecognized PHYs and cables was changed
based on firmware version number. Newer hardware use lower firmware
version numbers and this was causing some PHYs to be identified
as type 0x16 instead of 0xe (unknown).

Without this patch, newer card will incorrectly identify unknown
PHYs and cables.

This change adds hardware type to the check for firmware version
so the PHY type is reported correctly.

Fixes: 8db9e2a1b232 ("i40e: base driver")

Signed-off-by: Jingjing Wu <redacted>
CC: stable@dpdk.org
---
 drivers/net/i40e/base/i40e_common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
index 9591428..fbaa0be 100644
--- a/drivers/net/i40e/base/i40e_common.c
+++ b/drivers/net/i40e/base/i40e_common.c

@@ -1984,7 +1984,8 @@ enum i40e_status_code i40e_aq_get_link_info(struct i40e_hw *hw,
 	else
 		hw_link_info->lse_enable = false;
 
-	if ((hw->aq.fw_maj_ver < 4 || (hw->aq.fw_maj_ver == 4 &&
+	if ((hw->mac.type == I40E_MAC_XL710) &&
+	    (hw->aq.fw_maj_ver < 4 || (hw->aq.fw_maj_ver == 4 &&
 	     hw->aq.fw_min_ver < 40)) && hw_link_info->phy_type == 0xE)
 		hw_link_info->phy_type = I40E_PHY_TYPE_10GBASE_SFPP_CU;
 

-- 
2.4.11