[PATCH 11/13] net/thunderx: add secondary qset support in device configure
flat view
STALE3648d
From: Kamil Rytarowski <hidden>
Date: 2016-08-26 16:55:19
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Kamil Rytarowski <redacted> Signed-off-by: Maciej Czekaj <redacted> Signed-off-by: Kamil Rytarowski <redacted> Signed-off-by: Zyta Szpak <redacted> Signed-off-by: Slawomir Rosek <redacted> Signed-off-by: Radoslaw Biernacki <redacted> Signed-off-by: Jerin Jacob <redacted> --- drivers/net/thunderx/nicvf_ethdev.c | 65 +++++++++++++++++++++++++++++++++---- 1 file changed, 59 insertions(+), 6 deletions(-)
diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 8510675..fcdbebf 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c@@ -163,6 +163,7 @@ nicvf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) { struct nicvf *nic = nicvf_pmd_priv(dev); uint32_t buffsz, frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; + size_t i; PMD_INIT_FUNC_TRACE();
@@ -198,6 +199,10 @@ nicvf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) /* Update max frame size */ dev->data->dev_conf.rxmode.max_rx_pkt_len = (uint32_t)frame_size; nic->mtu = mtu; + + for (i = 0; i < nic->sqs_count; i++) + nic->snicvf[i]->mtu = mtu; + return 0; }
@@ -507,7 +512,8 @@ nicvf_qset_cq_alloc(struct rte_eth_dev *dev, struct nicvf *nic, const struct rte_memzone *rz; uint32_t ring_size = CMP_QUEUE_SZ_MAX * sizeof(union cq_entry_t); - rz = rte_eth_dma_zone_reserve(dev, "cq_ring", qidx, ring_size, + rz = rte_eth_dma_zone_reserve(dev, "cq_ring", + nicvf_netdev_qidx(nic, qidx), ring_size, NICVF_CQ_BASE_ALIGN_BYTES, nic->node); if (rz == NULL) { PMD_INIT_LOG(ERR, "Failed to allocate mem for cq hw ring");
@@ -530,8 +536,9 @@ nicvf_qset_sq_alloc(struct rte_eth_dev *dev, struct nicvf *nic, const struct rte_memzone *rz; uint32_t ring_size = SND_QUEUE_SZ_MAX * sizeof(union sq_entry_t); - rz = rte_eth_dma_zone_reserve(dev, "sq", qidx, ring_size, - NICVF_SQ_BASE_ALIGN_BYTES, nic->node); + rz = rte_eth_dma_zone_reserve(dev, "sq", + nicvf_netdev_qidx(nic, qidx), ring_size, + NICVF_SQ_BASE_ALIGN_BYTES, nic->node); if (rz == NULL) { PMD_INIT_LOG(ERR, "Failed allocate mem for sq hw ring"); return -ENOMEM;
@@ -563,8 +570,9 @@ nicvf_qset_rbdr_alloc(struct rte_eth_dev *dev, struct nicvf *nic, } ring_size = sizeof(struct rbdr_entry_t) * RBDR_QUEUE_SZ_MAX; - rz = rte_eth_dma_zone_reserve(dev, "rbdr", 0, ring_size, - NICVF_RBDR_BASE_ALIGN_BYTES, nic->node); + rz = rte_eth_dma_zone_reserve(dev, "rbdr", + nicvf_netdev_qidx(nic, 0), ring_size, + NICVF_RBDR_BASE_ALIGN_BYTES, nic->node); if (rz == NULL) { PMD_INIT_LOG(ERR, "Failed to allocate mem for rbdr desc ring"); return -ENOMEM;
@@ -1678,12 +1686,37 @@ nicvf_dev_close(struct rte_eth_dev *dev) } static int +nicvf_request_sqs(struct nicvf *nic) +{ + size_t i; + + assert_if_secondary(nic); + assert(nic->sqs_count > 0); + assert(nic->sqs_count <= MAX_SQS_PER_VF); + + /* Set no of Rx/Tx queues in each of the SQsets */ + for (i = 0; i < nic->sqs_count; i++) { + if (nicvf_svf_empty()) + rte_panic("Cannot assign sufficient number of " + "secondary queues to primary VF%" PRIu8 "\n", + nic->vf_id); + + nic->snicvf[i] = nicvf_svf_pop(); + nic->snicvf[i]->sqs_id = i; + } + + return nicvf_mbox_request_sqs(nic); +} + +static int nicvf_dev_configure(struct rte_eth_dev *dev) { - struct rte_eth_conf *conf = &dev->data->dev_conf; + struct rte_eth_dev_data *data = dev->data; + struct rte_eth_conf *conf = &data->dev_conf; struct rte_eth_rxmode *rxmode = &conf->rxmode; struct rte_eth_txmode *txmode = &conf->txmode; struct nicvf *nic = nicvf_pmd_priv(dev); + uint8_t cqcount; PMD_INIT_FUNC_TRACE();
@@ -1748,6 +1781,26 @@ nicvf_dev_configure(struct rte_eth_dev *dev) return -EINVAL; } + assert_if_secondary(nic); + NICVF_STATIC_ASSERT(MAX_RCV_QUEUES_PER_QS == MAX_SND_QUEUES_PER_QS); + cqcount = RTE_MAX(data->nb_tx_queues, data->nb_rx_queues); + if (cqcount > MAX_RCV_QUEUES_PER_QS) { + nic->sqs_count = RTE_ALIGN_CEIL(cqcount, MAX_RCV_QUEUES_PER_QS); + nic->sqs_count = (nic->sqs_count / MAX_RCV_QUEUES_PER_QS) - 1; + } else { + nic->sqs_count = 0; + } + + assert(nic->sqs_count <= MAX_SQS_PER_VF); + + if (nic->sqs_count > 0) { + if (nicvf_request_sqs(nic)) { + rte_panic("Cannot assign sufficient number of " + "secondary queues to PORT%d VF%" PRIu8 "\n", + dev->data->port_id, nic->vf_id); + } + } + PMD_INIT_LOG(DEBUG, "Configured ethdev port%d hwcap=0x%" PRIx64, dev->data->port_id, nicvf_hw_cap(nic));
--
1.9.1