Thread (8 messages) 8 messages, 5 authors, 2016-10-10

[PATCH v2] net/i40e: remove weak symbols

STALE3646d

From: Zoltan Kiss <hidden>
Date: 2016-07-20 17:11:55
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Using weak symbols have a few issues with static linking:

- normally the linker searches the .o files already linked, if your weak
  one is there, it won't check if there is a strong version
- unless the symbol is directly referred, but it's not the right thing to
  rely on
- or --whole-archive specified in the command line, which pulls in a lot
  of unwanted stuff
- whole-archive also makes libtool dropping the library from the command
  line, which is what should happen with dynamic linking, but not with
  static (observed on Ubuntu 14.04). This is an important bug if you
  build a static library depending on DPDK

This patch merges the two version and make the behaviour rely on the
config.

If we can agree in the concept, I can send a series to fix this for the
other weak functions.

Signed-off-by: Zoltan Kiss <redacted>
---

Notes:
    v2: fix commit message

 drivers/net/i40e/i40e_rxtx.c     | 36 +++++++++++++++++++++++++++++++++++-
 drivers/net/i40e/i40e_rxtx_vec.c | 36 ------------------------------------
 2 files changed, 35 insertions(+), 37 deletions(-)
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index d3cfb98..ad34d3a 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -3278,10 +3278,44 @@ i40e_set_tx_function(struct rte_eth_dev *dev)
 }
 
 /* Stubs needed for linkage when CONFIG_RTE_I40E_INC_VECTOR is set to 'n' */
-int __attribute__((weak))
+int __attribute__((cold))
 i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev __rte_unused *dev)
 {
+#ifndef RTE_LIBRTE_I40E_INC_VECTOR
 	return -1;
+#else
+#ifndef RTE_LIBRTE_IEEE1588
+	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
+	struct rte_fdir_conf *fconf = &dev->data->dev_conf.fdir_conf;
+
+	/* need SSE4.1 support */
+	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+		return -1;
+
+#ifndef RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE
+	/* whithout rx ol_flags, no VP flag report */
+	if (rxmode->hw_vlan_strip != 0 ||
+	    rxmode->hw_vlan_extend != 0)
+		return -1;
+#endif /* RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE */
+
+	/* no fdir support */
+	if (fconf->mode != RTE_FDIR_MODE_NONE)
+		return -1;
+
+	 /* - no csum error report support
+	 * - no header split support
+	 */
+	if (rxmode->hw_ip_checksum == 1 ||
+	    rxmode->header_split == 1)
+		return -1;
+
+	return 0;
+#else
+	RTE_SET_USED(dev);
+	return -1;
+#endif /* RTE_LIBRTE_IEEE1588 */
+#endif /* RTE_LIBRTE_I40E_INC_VECTOR */
 }
 
 uint16_t __attribute__((weak))
diff --git a/drivers/net/i40e/i40e_rxtx_vec.c b/drivers/net/i40e/i40e_rxtx_vec.c
index 05cb415..983b2c0 100644
--- a/drivers/net/i40e/i40e_rxtx_vec.c
+++ b/drivers/net/i40e/i40e_rxtx_vec.c
@@ -723,39 +723,3 @@ i40e_txq_vec_setup(struct i40e_tx_queue __rte_unused *txq)
 {
 	return 0;
 }
-
-int __attribute__((cold))
-i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev *dev)
-{
-#ifndef RTE_LIBRTE_IEEE1588
-	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
-	struct rte_fdir_conf *fconf = &dev->data->dev_conf.fdir_conf;
-
-	/* need SSE4.1 support */
-	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
-		return -1;
-
-#ifndef RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE
-	/* whithout rx ol_flags, no VP flag report */
-	if (rxmode->hw_vlan_strip != 0 ||
-	    rxmode->hw_vlan_extend != 0)
-		return -1;
-#endif
-
-	/* no fdir support */
-	if (fconf->mode != RTE_FDIR_MODE_NONE)
-		return -1;
-
-	 /* - no csum error report support
-	 * - no header split support
-	 */
-	if (rxmode->hw_ip_checksum == 1 ||
-	    rxmode->header_split == 1)
-		return -1;
-
-	return 0;
-#else
-	RTE_SET_USED(dev);
-	return -1;
-#endif
-}
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help