On 03/05/15 07:56, Zhang, Helin wrote:

Hi Gleb

Sorry for late! I am struggling on my tasks for the following DPDK release these days.

quoted

-----Original Message-----
From: Gleb Natapov [mailto:gleb@cloudius-systems.com]
Sent: Monday, March 2, 2015 8:56 PM
To: dev@dpdk.org
Cc: Zhang, Helin
Subject: Re: i40e and RSS woes

Ping.

On Thu, Feb 19, 2015 at 04:50:10PM +0200, Gleb Natapov wrote:

quoted

CCing i40e driver author in a hope to get an answer.

On Mon, Feb 16, 2015 at 03:36:54PM +0200, Gleb Natapov wrote:

quoted

I have an application that works reasonably well with ixgbe driver,
but when I try to use it with i40e I encounter various RSS related issues.

First one is that for some reason i40e, when it builds default reta
table, round down number of queues to power of two. Why is this? If

It seems because of i40e queue configuration. We will check it more and see
if it can be changed or improved later.

Helin, hi!
Sorry for bringing it back but it seems that the RSS queues number issue 
(rounding it down to the nearest power of 2)
still hasn't been addressed in the master branch.

Could u, pls., clarify what is that "i40e queue configuration" that 
requires this alignment u are referring above?

 From what i could see "num" parameter is not propagated outside the 
i40e_pf_config_rss() in any form except for RSS table contents.
This means that any code that would need to know the number of Rx queues 
would use the dev_data->nb_rx_queues (e.g. i40e_dev_rx_init())
and wouldn't be able to know that i40e_pf_config_rss() something 
different except for scanning the RSS table in HW which is of course not 
an option.

Therefore, from the first look it seems that this rounding may be safely 
removed unless I've missed something.

Pls., comment.

thanks,
vlad

quoted

quoted

quoted

I configure reta by my own using all of the queues everything seams
to be working. To add insult to injury I do not get any errors
during configuration some queues just do not receive any traffic.

The second problem is that for some reason i40e does not use 40 byte
toeplitz hash key like any other driver, but it expects the key to
be 52 bytes. And it would have being fine (if we ignore the fact
that it contradicts MS spec), but how my high level code suppose to know

that?

Actually a rss_key_len was introduced in struct rte_eth_rss_conf recently. So the
length should be indicated clearly. But I found the annotations of that structure
should have been reworked. I will try to rework it with clear descriptions.

quoted

quoted

quoted

And again, device configuration does not fail when wrong key length
is provided, it just uses some other key. Guys this kind of error
handling is completely unacceptable.

If less length of key is provided, it will not be used at all, the default key will be used.
So there is no issue as you said. But we need to add more clear description for the
structure of rte_eth_rss_conf.

Thank you very much for the good comments!

Regards,
Helin

quoted

quoted

quoted

The last one is more of a question. Why interface to change RSS hash
function (XOR or toeplitz) is part of a filter configuration and not
rss config?

--
			Gleb.

--
			Gleb.

--
			Gleb.