Thanks John.

I am trying to setup/use the flow-director-filter on the i540.

-- When I try to setup the flow-director-filter as per the example, I am getting "bad arguments"!!!
     So decided to see if the flush command would work.


In the interim --- I am using ethertype filter to accomplish the following.
What I am trying to do is this --
Use 2 different i540 cards
Use the igb_uio driver.
Use the testpmd app.
Setup 5 different MAC-ADDRESSes on each port. (using the set mac_addr command)
Setup 5 different RxQs and TxQs on each port.
And then use the testpmd app to generate traffic..

I am assuming that the testpmd app will now send and receive traffic using the 5 different MAC_ADDRESSes..
On each port's receive I will now want to classify on the MAC-ADDRESS and steer the traffic to different queues.

Is there an example/reference on how to achieve this?

Next, I would want to do "classify" on "flexbytes" and send/steer the traffic to different queues using flow-director-filter.

Thanks
-Navneet




-----Original Message-----
From: Mcnamara, John [mailto:john.mcnamara@intel.com] 
Sent: Wednesday, August 19, 2015 3:39 PM
To: Navneet Rao; dev@dpdk.org
Subject: RE: [dpdk-dev] flow_director_filter error!!

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Navneet Rao
Sent: Tuesday, August 18, 2015 4:01 PM
To:  HYPERLINK "mailto:dev@dpdk.org" dev@dpdk.org
Subject: [dpdk-dev] flow_director_filter error!!

After I start the testpmd app, I am flusing the flow_director_filter 
settings and get the following error -



testpmd> flush_flow_director 0

PMD: ixgbe_fdir_flush(): Failed to re-initialize FD table.

flow director table flushing error: (Too many open files in system)

Hi,

Are you setting a flow director filter before flushing? If so, could you give an example.

John.
--