Re: checking packet drop at NIC
From: Richardson, Bruce <hidden>
Date: 2014-02-07 09:13:42
The Intel DPDK does not at present support interrupts for dropped packets. Only support for link status change interrupts are supported at this time, but since the basics are there, it is possible with a bit of work to add handling for other interrupts if so needed. Regards, /Bruce
-----Original Message----- From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Sharath Sent: Friday, February 07, 2014 5:44 AM To: Vladimir Medvedkin Cc: dev-VfR2kkLFssw@public.gmane.org Subject: Re: [dpdk-dev] checking packet drop at NIC hi all, can anyone please let me know about this ?? Tx, -SB On Thu, Feb 6, 2014 at 11:20 AM, Sharath [off-list ref]wrote:quoted
hi Vladimir, I would like to know if there are any callback mechanism to detect FIFO errors in NIC ? could you please let me know. Tx -SB On Fri, Jan 31, 2014 at 12:56 PM, Sharath[off-list ref]wrote:quoted
quoted
thank you Vladimir. On Fri, Jan 31, 2014 at 12:36 PM, Vladimir Medvedkin < medvedkinv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:quoted
Hi Sharath, In DPDK interrupts are disabled to eliminate the performance overhead. Interrupts used only for link status change. So you can poll rte_eth_stats_get and check struct rte_eth_stats for errors. Regards, Vladimir 2014-01-31 Sharath [off-list ref] Hi Daniel & all,quoted
can anyone please let me know about this. Tx -SB On Thu, Jan 30, 2014 at 4:50 PM, Sharath <sharathjm.bharadwaj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.orgquoted
wrote:quoted
hi! are there any interrupts which are raised by DPDK, for the fifoerrors.quoted
please let me know, where can I find the details and how to handlesuchquoted
interrupts ? Tx -SB On Thu, Jan 30, 2014 at 2:30 PM, Sharath <sharathjm.bharadwaj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>wrote:quoted
quoted
Thanks Daniel ! Let me check it out . . . On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < daniel.kaminsky-bIuJOMs36akdlAAv9/cgxFaTQe2KTcn/@public.gmane.org> wrote:quoted
Hi Sharath, Try rte_eth_stats_get, I think this should give you what you'relookingquoted
quoted
quoted
for. Regards, Daniel On Tue, Jan 28, 2014 at 7:29 AM, Sharath <sharathjm.bharadwaj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>wrote:quoted
quoted
quoted
quoted
hi ! can someone please tell me whether the DPDK provides any method to handle below a. account the packet drops at NIC level ? is there any interrupt raised by DPDK for the same ? b. to check fifo errors ? c. way to check rx and tx in sync Tx, -SB