--- v5
+++ v3
@@ -1,52 +1,44 @@
 From: Robin Gong <yibin.gong@nxp.com>
 
-This patch set add new version of edma for i.mx7ulp, the main changes
+  This patch set add new version of edma for i.mx7ulp, the main changes
 are as belows:
- 1. only one dmamux.
- 2. another clock dma_clk except dmamux clk.
- 3. 16 independent interrupts instead of only one interrupt for
-    all channels
-For the first change, need modify fsl-edma-common.c and mcf-edma,
+  1. only one dmamux.
+  2. another clock dma_clk except dmamux clk.
+  3. 16 independent interrupts instead of only one interrupt for
+     all channels.
+  For the first change, need modify fsl-edma-common.c and mcf-edma,
 so create the first two patches to prepare without any function impact.
-
-For the third change, need request single irq for every channel with
+  For the third change, need request single irq for every channel with
 the legacy handler. But actually 2 dma channels share one interrupt(16
 channel interrupts, but 32 channels.),ch0/ch16,ch1/ch17... For now, just
 simply request irq without IRQF_SHARED flag, since 16 channels are enough
 on i.mx7ulp whose M4 domain own some peripherals.
 
 change from v1:
-  1. check .data of 'of_device_id' in probe instead of compatible name.
+  1. check .data of 'of_device_id' in probe instead of compatible name. 
 
 change from v2:
   1. move the difference between edma and edma2 into driver data so that
      no need version checking in fsl-edma.c.
 
-change from v3:
-  1. remove duplicated 'version' and 'dmamux_nr' in 'struct fsl_edma_engine'
-     since they are included in drvdata already.
-  2. downgrade print log level.
-  3. address some minor indent issues raised by Vinod.
-
-change from v4:
-  1. correct typo.
-
-Robin Gong (6):
-  dmaengine: fsl-edma: add drvdata for fsl-edma
+Robin Gong (8):
+  dmaengine: fsl-edma: add dmamux_nr for next version
+  dmaengine: mcf-edma: update to 'dmamux_nr'
   dmaengine: fsl-edma-common: move dmamux register to another single
     function
   dmaengine: fsl-edma-common: version check for v2 instead
+  dmaengine: fsl-edma: add drvdata for vf610
   dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
   dmaengine: fsl-edma: add i.mx7ulp edma2 version support
   ARM: dts: imx7ulp: add edma device node
 
- Documentation/devicetree/bindings/dma/fsl-edma.txt |  44 ++++++++-
+ Documentation/devicetree/bindings/dma/fsl-edma.txt |  44 +++++++-
  arch/arm/boot/dts/imx7ulp.dtsi                     |  28 ++++++
- drivers/dma/fsl-edma-common.c                      |  83 ++++++++++------
- drivers/dma/fsl-edma-common.h                      |  14 ++-
- drivers/dma/fsl-edma.c                             | 109 ++++++++++++++++++---
- drivers/dma/mcf-edma.c                             |  11 ++-
- 6 files changed, 239 insertions(+), 50 deletions(-)
+ drivers/dma/fsl-edma-common.c                      |  74 +++++++++-----
+ drivers/dma/fsl-edma-common.h                      |  13 +++
+ drivers/dma/fsl-edma.c                             | 112 ++++++++++++++++++---
+ drivers/dma/mcf-edma.c                             |   1 +
+ 6 files changed, 230 insertions(+), 42 deletions(-)
 
 -- 
 2.7.4