[Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid

Hello Ernie,

re-add CC: buildroot at busybox.net

On Sat, 6 Jun 2020 11:29:20 -0700, Ernie Carp [off-list ref] wrote:

Hello Peter,

Sorry, sometimes Ernie is bad. I did not do a full rebuild. I will try that.

Thank you,
Ernie.

Please keep the mailing list on CC

Regards,
Peter

On Sat, Jun 6, 2020 at 10:51 AM Peter Seiderer [off-list ref] wrote:

quoted

Hello Ernie,

On Sat, 6 Jun 2020 09:52:07 -0700, Ernie Carp [off-list ref]
wrote:

quoted

Hello,

I post this in case it helps someone else.

Using Buildroot Version: 2020.08-git-00103-gc7cd1f0-dirty
Board: atmel_sama5d27_som1_ek_mmc_dev_defconfig
util-linux version - 2.35.1

When enabling rrdtool, FONTCONFIG_VERSION = 2.13.1 fails with error:

checking for UUID... no
checking where uuid functions comes from... configure: error:
*** uuid is required. install util-linux

I checked, util-linux is installed and uuid is selected but build fails.

I

quoted

don't know how to fix it properly so I used the older package makefile

from

quoted

buildroot 2019.05-git-00237-gb643a75-dirty that has util-linux version

2.33

quoted

and now rrdtool and all dependencies build without error.

The following defconfig compiles here without failure
(atmel_sama5d27_som1_ek_mmc_dev_defconfig with BR2_PACKAGE_RRDTOOL=y):

BR2_arm=y
BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREAD_DEBUG=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c
board/atmel/sama5d27_som1_ek_mmc/genimage.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call
github,linux4sam,linux-at91,linux4sam-2020.04)/linux-at91-linux4sam-2020.04.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="sama5"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_som1_ek"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_MPG123=y
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_UNZIP=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_ZIP=y
BR2_PACKAGE_GDB=y
BR2_PACKAGE_LMBENCH=y
BR2_PACKAGE_DOSFSTOOLS=y
BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
BR2_PACKAGE_MMC_UTILS=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_RRDTOOL=y
BR2_PACKAGE_WILC1000_FIRMWARE=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_RNG_TOOLS=y
BR2_PACKAGE_SETSERIAL=y
BR2_PACKAGE_SPI_TOOLS=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BRIDGE_UTILS=y
BR2_PACKAGE_CAN_UTILS=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_IPERF=y
BR2_PACKAGE_IPROUTE2=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_MII_DIAG=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_BASH=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_VIM=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call
github,linux4sam,at91bootstrap,v3.9.2)/at91bootstrap3-v3.9.2.tar.gz"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_som1_eksd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call
github,linux4sam,u-boot-at91,linux4sam-2020.04)/u-boot-at91-linux4sam-2020.04.tar.gz"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_som1_ek_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y


Are your sure you did a complete re-build (or at least a re-build of the
util-linux package) after enabling rrdtool (see [1])?

Regards,
Peter

[1] https://buildroot.org/downloads/manual/manual.html#full-rebuild

quoted

Regards,
Ernie Carp