[Buildroot] QtWebEngine on RPI 0 W

Hello Rafa,

On Tue, 28 Jan 2020 01:41:07 -0600 (CST), rscr [off-list ref] wrote:

quoted

Hi,

I have built a custom image for RPI 0 W. Now I need QT with QtWebEngine.

- As I am using  toolchain *arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf*, I
have to use Qt 5.6.3 because it is supported by GCC > 4.8

Why stay with this old-gcc-version toolchain?

- This toolchain is the one recommended in raspberry/tools github:
https://github.com/raspberrypi/tools/blob/master/arm-bcm2708/arm-linux-gnueabihf
<https://github.com/raspberrypi/tools/blob/master/arm-bcm2708/arm-linux-gnueabihf>

If there is a new version, I didn't know it. I could use, for example, these
toolchains? https://github.com/abhiTronix/raspberry-pi-cross-compilers
<https://github.com/abhiTronix/raspberry-pi-cross-compilers>

Use an up-to-date buildroot generated one (downside is an increased build duration) ;-)

quoted

ISSUE:

When trying to build the image, I got building failed. Some of the errors
are:

Running configuration tests (phase 1)...
/home/ibercomp/rcr/projects/cp4/buildroot/output/host/bin/arm-linux-gnueabihf-g++
-c -fvisibility=hidden fvisibility.c
Symbol visibility control enabled.
collect2: fatal error: cannot find 'ld'
compilation terminated
...
Makefile:192: recipe for target 'db2.o' failed
...
Makefile:192: recipe for target 'ibase.o' failed
...
Makefile:195: recipe for target 'icu.o' failed
make[2]: *** [icu.o] Error 1
ICU disabled.
The ICU library support cannot be enabled.


Find attached my defconfig: cp4_defconfig.cp4_defconfig
<http://buildroot-busybox.2317881.n4.nabble.com/file/t2824/cp4_defconfig.cp4_defconfig>

Important information missing, which buildroot version do you use?

I am using buildroot-2019.02.09

I will build the image again to provide the complete failure output....but
If there is any solution where I could keep using QT 5.11.3 version with a
GCC > 5 I prefer it.

Thanks for the info, will try to reproduce your failure (did try it with
buildroot-2019.11.1 but qt5webengine-5.6.3 compile failed because of
incompatibility with some of the version bumped dependent libs e.g.
ffmpeg, libjpeg, ...).

Regards,
Peter

Kind Regards,

Rafa









--
Sent from: http://buildroot-busybox.2317881.n4.nabble.com/
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot