[Buildroot] [U-Boot] Craneboard with Uboot and xloader

After trying to correct this issue, i have a difficult problem :( the
booting freeze in "Starting kernel..." and it can't decompressing the
uImage and starting the kernel.
for information i choosed the kernel 2.6.39.4 in buildroot configuration
with am3517_crane_defconfig file (a defconfig for version 2.6.32 that i
copied manually) that i found in craneboard-kernel gitorious.

Best regards
Mohamed

On Sat, Feb 25, 2012 at 3:35 PM, Tom Rini [off-list ref] wrote:

On Sat, Feb 25, 2012 at 6:00 AM, Mohamed HAMZAOUI [off-list ref]
wrote:

quoted

Hi M Tom,
I checked the file am3517_crane.h and it well use "rescan" instead of

"init"

quoted

 but the problem is that after compilation, when I check the bootcmd I

find

quoted

another one with init and not with rescan !
When i tried to change the variable with the setenv command, the system

boot

quoted

 correctly from the SD card.
Can you tell me how I can fix that and why the compilation or the MLO,
u-boot.img files not have the correct bootcmd ?

Ah, how about this, you've been using the board previously, yes?  It
probably had a saved environment from a previous version written to
NAND and was using that.  You might want to try doing 'nand erase
260000 20000' to erase the old environment, then reset the board to
get the full, new, default environment.

--
Tom

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120226/2e3364f8/attachment-0001.html>