On 26/11/2021 17.16, Alexander Lobakin wrote:

From: Jesper Dangaard Brouer <redacted>
Date: Mon, 15 Nov 2021 21:36:30 +0100

quoted

Enabling the XDP bpf_prog access to data_meta area is a very small
change. Hint passing 'true' to xdp_prepare_buff().

The SKB layers can also access data_meta area, which required more
driver changes to support. Reviewers, notice the igc driver have two
different functions that can create SKBs, depending on driver config.

Hint for testers, ethtool priv-flags legacy-rx enables
the function igc_construct_skb()

  ethtool --set-priv-flags DEV legacy-rx on

Signed-off-by: Jesper Dangaard Brouer <redacted>
---
  drivers/net/ethernet/intel/igc/igc_main.c |   29 +++++++++++++++++++----------
  1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 76b0a7311369..b516f1b301b4 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c

@@ -1718,24 +1718,26 @@ static void igc_add_rx_frag(struct igc_ring *rx_ring,
  
  static struct sk_buff *igc_build_skb(struct igc_ring *rx_ring,
  				     struct igc_rx_buffer *rx_buffer,
-				     union igc_adv_rx_desc *rx_desc,
-				     unsigned int size)
+				     struct xdp_buff *xdp)
  {
-	void *va = page_address(rx_buffer->page) + rx_buffer->page_offset;
+	unsigned int size = xdp->data_end - xdp->data;
  	unsigned int truesize = igc_get_rx_frame_truesize(rx_ring, size);
+	unsigned int metasize = xdp->data - xdp->data_meta;
  	struct sk_buff *skb;
  
  	/* prefetch first cache line of first page */
-	net_prefetch(va);
+	net_prefetch(xdp->data);

I'd prefer prefetching xdp->data_meta here. GRO layer accesses it.
Maximum meta size for now is 32, so at least 96 bytes of the frame
will stil be prefetched.

Prefetch works for "full" cachelines. Intel CPUs often prefect two 
cache-lines, when doing this, thus I guess we still get xdp->data.

I don't mind prefetching xdp->data_meta, but (1) I tried to keep the 
change minimal as current behavior was data area I kept that. (2) 
xdp->data starts on a cacheline and we know NIC hardware have touched 
that, it is not a full-cache-miss due to DDIO/DCA it is known to be in 
L3 cache (gain is around 2-3 ns in my machine for data prefetch).
Given this is only a 2.5 Gbit/s driver/HW I doubt this make any difference.

Tony is it worth resending a V2 of this patch?

quoted

  
  	/* build an skb around the page buffer */
-	skb = build_skb(va - IGC_SKB_PAD, truesize);
+	skb = build_skb(xdp->data_hard_start, truesize);
  	if (unlikely(!skb))
  		return NULL;
  
  	/* update pointers within the skb to store the data */
-	skb_reserve(skb, IGC_SKB_PAD);
+	skb_reserve(skb, xdp->data - xdp->data_hard_start);
  	__skb_put(skb, size);
+	if (metasize)
+		skb_metadata_set(skb, metasize);
  
  	igc_rx_buffer_flip(rx_buffer, truesize);
  	return skb;

@@ -1746,6 +1748,7 @@ static struct sk_buff *igc_construct_skb(struct igc_ring *rx_ring,
  					 struct xdp_buff *xdp,
  					 ktime_t timestamp)
  {
+	unsigned int metasize = xdp->data - xdp->data_meta;
  	unsigned int size = xdp->data_end - xdp->data;
  	unsigned int truesize = igc_get_rx_frame_truesize(rx_ring, size);
  	void *va = xdp->data;

@@ -1756,7 +1759,7 @@ static struct sk_buff *igc_construct_skb(struct igc_ring *rx_ring,
  	net_prefetch(va);

...here as well.