On Sun, Jan 24, 2021 at 8:07 PM Yonghong Song [off-list ref] wrote:

On 1/22/21 4:44 PM, KP Singh wrote:

quoted

The script runs the BPF selftests locally on the same kernel image
as they would run post submit in the BPF continuous integration
framework.

The goal of the script is to allow contributors to run selftests locally
in the same environment to check if their changes would end up breaking
the BPF CI and reduce the back-and-forth between the maintainers and the
developers.

Signed-off-by: KP Singh <kpsingh@kernel.org>

Thanks! I tried the script, and it works great.

Tested-by: Yonghong Song <redacted>

Thanks!

When I tried to apply the patch locally, I see the following warnings:
-bash-4.4$ git apply ~/p1.txt
/home/yhs/p1.txt:306: space before tab in indent.
                 : )
/home/yhs/p1.txt:307: space before tab in indent.
                         echo "Invalid Option: -$OPTARG requires an
argument"
warning: 2 lines add whitespace errors.

Maybe you want to fix them.

Sorry about that, fixed in the next revision.

One issue I found with the following script,
KBUILD_OUTPUT=/home/yhs/work/linux-bld/
tools/testing/selftests/bpf/run_in_vm.sh -- cat /sys/fs/bpf/progs.debug
I see the following warning:

[    1.081000] in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid:
101, name: cat
[    1.081684] 3 locks held by cat/101:

[    1.082032]  #0: ffff8880047770a0 (&p->lock){+.+.}-{3:3}, at:
bpf_seq_read+0x3a/0x3d0
[    1.082734]  #1: ffffffff82d69800 (rcu_read_lock){....}-{1:2}, at:
bpf_iter_run_prog+0x5/0x160
[    1.083521]  #2: ffff88800618c148 (&mm->mmap_lock#2){++++}-{3:3}, at:
exc_page_fault+0x1a1/0x640
[    1.084344] Preemption disabled at:

[    1.084346] [<ffffffff8108f913>] migrate_disable+0x33/0x80

[    1.085207] CPU: 2 PID: 101 Comm: cat Not tainted
5.11.0-rc4-00524-g6e66fbb10597-dirty #1257
[    1.085933] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.9.3-1.el7.centos 04/01
/2014

[    1.086747] Call Trace:

[    1.086961]  dump_stack+0x77/0x97

[    1.087294]  ___might_sleep.cold.119+0xf2/0x106

[    1.087702]  exc_page_fault+0x1c1/0x640

[    1.088056]  asm_exc_page_fault+0x1e/0x30

[    1.088413] RIP:
0010:bpf_prog_0a182df2d34af188_dump_bpf_prog+0xf5/0xbc8

[    1.089009] Code: 00 00 8b 7d f4 41 8b 76 44 48 39 f7 73 06 48 01 fb
49 89 df 4c 89 7d d8 49 8b
bd 20 01 00 00 48 89 7d e0 49 8b bd e0 00 00 00 <48> 8b 7f 20 48 01 d7
48 89 7d e8 48 89 e9 48 83 c
1 d0 48 8b 7d c8

[    1.090635] RSP: 0018:ffffc90000197dc8 EFLAGS: 00010282

[    1.091100] RAX: 0000000000000000 RBX: ffff888005a60458 RCX:
0000000000000024
[    1.091727] RDX: 00000000000002f0 RSI: 0000000000000509 RDI:
0000000000000000
[    1.092384] RBP: ffffc90000197e20 R08: 0000000000000001 R09:
0000000000000000
[    1.093014] R10: 0000000000000002 R11: 0000000000000000 R12:
0000000000020000
[    1.093660] R13: ffff888006199800 R14: ffff88800474c480 R15:
ffff888005a60458
[    1.094314]  ? bpf_prog_0a182df2d34af188_dump_bpf_prog+0xc8/0xbc8
[    1.094871]  bpf_iter_run_prog+0x75/0x160
[    1.095231]  __bpf_prog_seq_show+0x39/0x40
[    1.095602]  bpf_seq_read+0xf6/0x3d0
[    1.095915]  vfs_read+0xa3/0x1b0
[    1.096226]  ksys_read+0x4f/0xc0
[    1.096527]  do_syscall_64+0x2d/0x40
[    1.096831]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    1.097287] RIP: 0033:0x7f13a43e3ec2
[    1.097625] Code: c0 e9 b2 fe ff ff 50 48 8d 3d aa 36 0a 00 e8 65 eb
01 00 0f 1f 44 00 00 f3 0f
1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77
56 c3 0f 1f 44 00 00 48 83 e
c 28 48 89 54 24
[    1.099232] RSP: 002b:00007fffed256bb8 EFLAGS: 00000246 ORIG_RAX:
0000000000000000
[    1.099922] RAX: ffffffffffffffda RBX: 0000000000020000 RCX:
00007f13a43e3ec2
[    1.100576] RDX: 0000000000020000 RSI: 00007f13a42d0000 RDI:
0000000000000003
[    1.101197] RBP: 00007f13a42d0000 R08: 00007f13a42cf010 R09:
0000000000000000
[    1.101868] R10: 0000000000000022 R11: 0000000000000246 R12:
0000561599794c00
[    1.102486] R13: 0000000000000003 R14: 0000000000020000 R15:
0000000000020000

Note that above `cat` is called during /sbin/init init process.
......
[    0.964879] Run /sbin/init as init process

starting pid 84, tty '': '/etc/init.d/rcS'
......

I checked the assembly code and the above error info and the reason
is due to an exception (address 0) happens in bpf_prog iterator.

SEC("iter/bpf_prog")
int dump_bpf_prog(struct bpf_iter__bpf_prog *ctx)
{
         struct seq_file *seq = ctx->meta->seq;
         __u64 seq_num = ctx->meta->seq_num;
         struct bpf_prog *prog = ctx->prog;
         struct bpf_prog_aux *aux;

         if (!prog)
                 return 0;

         aux = prog->aux;
         if (seq_num == 0)
                 BPF_SEQ_PRINTF(seq, "  id name             attached\n");

         BPF_SEQ_PRINTF(seq, "%4u %-16s %s %s\n", aux->id,
                        get_name(aux->btf, aux->func_info[0].type_id,
aux->name),
                        aux->attach_func_name, aux->dst_prog->aux->name);
         return 0;
}

In the above, aux->dst_prog == 0 and exception does not get caught
properly and kernel complains. This might be due to
ths `cat /sys/fs/bpf/progs.debug` is called too early (in init process)
and something is not set up properly yet.

In a different rootfs, I called `cat /sys/fs/bpf/progs.debug` after
login prompt, and I did not see the error.

If somebody knows what is the possible reason, that will be great.
Otherwise, I will continue to debug this later.

quoted

---
  tools/testing/selftests/bpf/run_in_vm.sh | 353 +++++++++++++++++++++++
  1 file changed, 353 insertions(+)
  create mode 100755 tools/testing/selftests/bpf/run_in_vm.sh

diff --git a/tools/testing/selftests/bpf/run_in_vm.sh b/tools/testing/selftests/bpf/run_in_vm.sh
new file mode 100755
index 000000000000..09bb9705acb3
--- /dev/null
+++ b/tools/testing/selftests/bpf/run_in_vm.sh

@@ -0,0 +1,353 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+set -u
+set -e
+
+QEMU_BINARY="${QEMU_BINARY:="qemu-system-x86_64"}"
+X86_BZIMAGE="arch/x86/boot/bzImage"
+DEFAULT_COMMAND="./test_progs"
+MOUNT_DIR="mnt"
+ROOTFS_IMAGE="root.img"
+OUTPUT_DIR="$HOME/.bpf_selftests"
+KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/configs/latest.config "
+INDEX_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/configs/INDEX "
+NUM_COMPILE_JOBS="$(nproc)"
+
+usage()
+{
+     cat <<EOF
+Usage: $0 [-k] [-i] [-d <output_dir>] -- [<command>]
+
+<command> is the command you would normally run when you are in
+tools/testing/selftests/bpf. e.g:
+
+     $0 -- ./test_progs -t test_lsm
+
+If no command is specified, "${DEFAULT_COMMAND}" will be run by
+default.
+
+If you build your kernel using KBUILD_OUTPUT= or O= options, these
+can be passed as environment variables to the script:
+
+  O=<path_relative_to_cwd> $0 -- ./test_progs -t test_lsm
+
+or
+
+  KBUILD_OUTPUT=<path_relative_to_cwd> $0 -- ./test_progs -t test_lsm
+
+Options:
+
+     -k)             "Keep the kernel", i.e. don't recompile the kernel if it exists.
+     -i)             Update the rootfs image with a newer version.
+     -d)             Update the output directory (default: ${OUTPUT_DIR})
+     -j)             Number of jobs for compilation, similar to -j in make
+                     (default: ${NUM_COMPILE_JOBS})
+EOF
+}
+

[...]