Re: [B.A.T.M.A.N.] running batmand on Debian for Alix

Hi Wayne,

thanks for the heads up, you were absolutely correct, I set the ssid
and the protocol is running successfully now - a 'rookie' error on my
part. Its still not associated with a cell, but for the current moment
I don't see any problems with it, that way.

Kind Regards
Dominic
UCT,SA

On Sat, Sep 22, 2012 at 6:37 PM, Wayne Abroue [off-list ref] wrote:

On Sat, Sep 22, 2012 at 6:06 PM, Dominic Follett-Smith
[off-list ref] wrote:

quoted

Hi,

I am having trouble running the batman protocol on my debian distro
(2.6.32) on PC Engine's Alix boards. I am using CM9 pci cards, with
ath5k driver from the compat-wireless-3.5 package. I can scan for
networks, and view a survey dump using the iw tool. despite being able
to start the daemon successfully, neither node can receive packets
from one another. I set the mode to ad-hoc and channel to channel 7 on
both alix boards. The following url is a link to my system profile on
pastebin:

http://pastebin.com/RtpTe31C

it includes (ifconfig, iwconfig, interfaces configuration, sample of
running batman, dmesg for wireless interface wlan0 and modinfo for
ath5k )

I can't figure out what I am doing wrong, I had perhaps naively
assumed that passing a configured wireless interface would be enough,
but I guess I have missed something important.

Help is always greatly appreciated.

Thanks
Dominic
UCT, SA

Would it work without a ESSID and cell ID?


wlan0     IEEE 802.11abg  ESSID:off/any
          Mode:Ad-Hoc  Frequency:2.442 GHz  Cell: Not-Associated
          Tx-Power=20 dBm
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off

Wayne

-- 
If you are going to achieve excellence in big things, you develop the
habit in little matters. Excellence is not an exception, it is a
prevailing attitude.
Colin Powell