--- v2
+++ v1
@@ -1,30 +1,36 @@
 Hi all,
 
-This patch adds a GPIO driver for the Xilinx Zynq/Zynq
+This series adds a GPIO driver for the Xilinx Zynq/Zynq
 UltraScale+ MPSoC architecture based on the corresponding
 driver in the Linux kernel.
 
-The work was mainly carried out by Thomas Haemmerle, with
-several format fixes and the revisions for v2 applied by me.
-Version 2 of this patch considers the review by Ahmad
-Fatoum.
+The work was mainly carried out by Thomas Haemmerle with
+a few additions by Michael Tretter. After applying several
+format fixes, I tested the driver on the ZCU106 evaluation
+board as well as on a custom Zynq UltraScale+ MPSoC board.
+Looking forward to your comments!
 
-Tested on the ZCU106 evaluation board as well as on a
-custom Zynq UltraScale+ MPSoC board.
+The second patch depends on the recently submitted addition
+of support for the ZCU106 evaluation board [0].
 
 Best regards,
 Michael
 
+[0] https://lore.barebox.org/barebox/20210913121350.9307-2-michael.riesch@wolfvision.net/T/#u
+
+Michael Tretter (1):
+  arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards
+
 Thomas Haemmerle (1):
   gpio: add driver for xilinx zynq and zynqmp
 
- arch/arm/Kconfig                  |   2 +
- arch/arm/configs/zynq_defconfig   |   1 +
- arch/arm/configs/zynqmp_defconfig |   1 +
- drivers/gpio/Kconfig              |   7 +
- drivers/gpio/Makefile             |   1 +
- drivers/gpio/gpio-zynq.c          | 436 ++++++++++++++++++++++++++++++
- 6 files changed, 448 insertions(+)
+ arch/arm/Kconfig                    |   2 +
+ arch/arm/dts/zynqmp-zcu104-revA.dts |   4 +
+ arch/arm/dts/zynqmp-zcu106-revA.dts |   4 +
+ drivers/gpio/Kconfig                |   6 +
+ drivers/gpio/Makefile               |   1 +
+ drivers/gpio/gpio-zynq.c            | 453 ++++++++++++++++++++++++++++
+ 6 files changed, 470 insertions(+)
  create mode 100644 drivers/gpio/gpio-zynq.c
 
 --