Hi all,

This series adds a GPIO driver for the Xilinx Zynq/Zynq
UltraScale+ MPSoC architecture based on the corresponding
driver in the Linux kernel.

The work was mainly carried out by Thomas Haemmerle with
a few additions by Michael Tretter. After applying several
format fixes, I tested the driver on the ZCU106 evaluation
board as well as on a custom Zynq UltraScale+ MPSoC board.
Looking forward to your comments!

The second patch depends on the recently submitted addition
of support for the ZCU106 evaluation board [0].

Best regards,
Michael

[0] https://lore.barebox.org/barebox/20210913121350.9307-2-michael.riesch@wolfvision.net/T/#u

Michael Tretter (1):
  arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards

Thomas Haemmerle (1):
  gpio: add driver for xilinx zynq and zynqmp

 arch/arm/Kconfig                    |   2 +
 arch/arm/dts/zynqmp-zcu104-revA.dts |   4 +
 arch/arm/dts/zynqmp-zcu106-revA.dts |   4 +
 drivers/gpio/Kconfig                |   6 +
 drivers/gpio/Makefile               |   1 +
 drivers/gpio/gpio-zynq.c            | 453 ++++++++++++++++++++++++++++
 6 files changed, 470 insertions(+)
 create mode 100644 drivers/gpio/gpio-zynq.c

-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox