Compiled in boot environment and dtbo files

Dear community,

actually I wonder how to prepare a reset/boot up default boot environment compiled in.

Is it correct, that my 1st task to achieve this is to add a new file in defaultenv/defaultenv-2-base/boot
like “insidem2m” for example? I managed to modify the existing “sd” entry to be able to boot
and persist this, thats how my new entry should look:

#!/bin/sh

global.bootm.image=/boot/uImage
global.bootm.oftree=/boot/am335x-boneblack.dtb
global.linux.bootargs.dyn.root="cape_enable=capemgr.enable_partno=BB-UART1,BB-UART4 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait”

right?


I can edit and modify those file and persist them, where is this saved? In my case it looks modified stuff shows
up in barebox.env in my /boot.

Especially my question is, when I add a boot entry compiled in, the boot.default variable should get this entry
and this must be reset/default compiled-in, how is this done?

My second issue is, currently I need to apply two dtbo files to the kernel booting, how do I do this in barebox?

In u-boot this looks like

uboot_overlay_addr0=/lib/firmware/BB-UART1-00A0.dtbo
uboot_overlay_addr1=/lib/firmware/BB-UART4-00A0.dtbo

in uEnv.txt, I did not find a pendant in the barebox world yet. The capemgr/slot kernel commandline stuff is
deprecated, right? 




INSIDE M2M GmbH
Konstantin Kletschke
Berenbosteler Straße 76 B
30823 Garbsen

Telefon: +49 (0) 5137 90950136
Mobil: +49 (0) 151 15256238
Fax: +49 (0) 5137 9095010

konstantin.kletschke@inside-m2m.de
http://www.inside-m2m.de 

Geschäftsführung: Michael Emmert, Ingo Haase, Dr. Fred Könemann, Derek Uhlig
HRB: 111204, AG Hannover