Hi,

ok i was able to preceed a little. The new error message after booting is: 

Board: RAFI i.MX53 
eth@eth0: got MAC address from EEPROM: ******** 
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V

8-bit) 

Bad block table found at page 65472, version 0x01 
Bad block table found at page 65408, version 0x01 
nand_read_bbt: Bad block at 0x060a0000 
Malloc space: 0x7df00000 -> 0x7fefffff (size 32 MB) 
Stack space : 0x7def8000 -> 0x7df00000 (size 32 kB) 
envfs: wrong magic on /dev/env0 
running /env/bin/init... 
not found 
barebox:/ 

What commands are you using to erase and program the flash area?

Environment config 
nand_parts="512k(barebox)ro,512k(bareboxenv),4M(kernel),120M(root)" 

board_init.c 
devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self0"); 
devfs_add_partition("nand0", 0x80000, 0x80000, PARTITION_FIXED, "env0"); 

These partitions aren't bad block aware, from memory, I think u want
something like:

devfs_add_partition("nand0", 0x80000, 0x80000, PARTITION_FIXED, "env0_raw");
dev_add_bb_dev("env0_raw", "env0");

Cheers,
Marc


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox