[PATCH 4/4] remove now unnecessary HAVE_MMU from Kconfig
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2011-08-03 07:15:28
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
MMU now can be enabled on every ARM board, so remove the dependency. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-imx/Kconfig | 28 +++++++--------------------- arch/arm/mach-mxs/Kconfig | 2 -- arch/arm/mach-omap/Kconfig | 2 -- common/Kconfig | 4 ---- 4 files changed, 7 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e661142..8dc6a24 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig@@ -182,7 +182,6 @@ config MACH_SCB9328 select HAS_DM9000 select HAS_CFI select MACH_HAS_LOWLEVEL_INIT - select HAVE_MMU help Say Y here if you are using the Synertronixx scb9328 board
@@ -222,7 +221,6 @@ choice config MACH_EUKREA_CPUIMX25 bool "Eukrea CPUIMX25" select MACH_HAS_LOWLEVEL_INIT - select HAVE_MMU help Say Y here if you are using the Eukrea Electromatique's CPUIMX25 equipped with a Freescale i.MX25 Processor
@@ -240,7 +238,6 @@ config MACH_FREESCALE_MX25_3STACK config MACH_TX25 bool "Ka-Ro TX25" select MACH_HAS_LOWLEVEL_INIT - select HAVE_MMU help Say Y here if you are using the Ka-Ro tx25 board
@@ -259,7 +256,6 @@ choice config MACH_EUKREA_CPUIMX27 bool "EUKREA CPUIMX27" select HAS_CFI - select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using Eukrea's CPUIMX27 equipped
@@ -276,7 +272,6 @@ config MACH_IMX27ADS config MACH_PCA100 bool "phyCard-i.MX27" select MACH_HAS_LOWLEVEL_INIT - select HAVE_MMU help Say Y here if you are using Phytec's phyCard-i.MX27 (pca100) equipped with a Freescale i.MX27 Processor
@@ -288,7 +283,6 @@ config MACH_PCM038 select SPI select DRIVER_SPI_IMX select DRIVER_SPI_MC13783 - select HAVE_MMU help Say Y here if you are using Phytec's phyCORE-i.MX27 (pcm038) equipped with a Freescale i.MX27 Processor
@@ -296,7 +290,6 @@ config MACH_PCM038 config MACH_NESO bool "Garz+Fricke Neso" select MACH_HAS_LOWLEVEL_INIT - select HAVE_MMU help Say Y here if you are using the Garz+Fricke Neso board equipped with a Freescale i.MX27 Processor
@@ -316,7 +309,6 @@ choice config MACH_PCM037 bool "phyCORE-i.MX31" select MACH_HAS_LOWLEVEL_INIT - select HAVE_MMU select USB_ISP1504 if USB select ARCH_HAS_L2X0 help
@@ -337,7 +329,6 @@ choice config MACH_EUKREA_CPUIMX35 bool "EUKREA CPUIMX35" - select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT select ARCH_HAS_L2X0 help
@@ -357,21 +348,19 @@ config MACH_FREESCALE_MX35_3STACK with a Freescale i.MX35 Processor config MACH_PCM043 - bool "phyCORE-i.MX35" - select HAS_CFI - select HAVE_MMU + bool "phyCORE-i.MX35" + select HAS_CFI select MACH_HAS_LOWLEVEL_INIT select ARCH_HAS_L2X0 - help - Say Y here if you are using Phytec's phyCORE-i.MX35 (pcm043) equipped - with a Freescale i.MX35 Processor + help + Say Y here if you are using Phytec's phyCORE-i.MX35 (pcm043) equipped + with a Freescale i.MX35 Processor config MACH_GUF_CUPID - bool "Garz+Fricke Cupid" - select HAVE_MMU + bool "Garz+Fricke Cupid" select MACH_HAS_LOWLEVEL_INIT select ARCH_HAS_L2X0 - help + help Say Y here if you are using the Garz+Fricke Neso board equipped with a Freescale i.MX35 Processor
@@ -389,12 +378,10 @@ choice config MACH_FREESCALE_MX51_PDK bool "Freescale i.MX51 PDK" - select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT config MACH_EUKREA_CPUIMX51SD bool "EUKREA CPUIMX51" - select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using Eukrea's CPUIMX51 equipped
@@ -414,7 +401,6 @@ choice config MACH_FREESCALE_MX53_LOCO bool "Freescale i.MX53 LOCO" - select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT endchoice
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index f9cefaf..caef7e0 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig@@ -39,7 +39,6 @@ config MACH_MX23EVK config MACH_CHUMBY bool "Chumby Falconwing" - select HAVE_MMU help Say Y here if you are using the "chumby one" aka falconwing from Chumby Industries
@@ -55,7 +54,6 @@ choice config MACH_TX28 bool "KARO tx28" - select HAVE_MMU help Say Y here if you are using the KARO TX28 CPU module.
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index f256310..1174df0 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig@@ -140,7 +140,6 @@ config MACH_OMAP3EVM config MACH_PANDA bool "Texas Instrument's Panda Board" - select HAVE_MMU select HAVE_NOSHELL select MACH_HAS_LOWLEVEL_INIT help
@@ -148,7 +147,6 @@ config MACH_PANDA config MACH_PCM049 bool "Phytec phyCORE pcm049" - select HAVE_MMU select HAVE_NOSHELL depends on ARCH_OMAP4 select MACH_HAS_LOWLEVEL_INIT
diff --git a/common/Kconfig b/common/Kconfig
index 382b407..422d185 100644
--- a/common/Kconfig
+++ b/common/Kconfig@@ -70,12 +70,8 @@ config ENVIRONMENT_VARIABLES menu "memory layout " -config HAVE_MMU - bool - config MMU bool "Enable MMU" - depends on HAVE_MMU help Saying yes here enables the MMU. This is useful on some architectures to enable the data cache which depends on the MMU. See Documentation/mmu.txt
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox