[PATCH v5 09/17] ASoC: fsl_ssi: Clean up fsl_ssi_setup_regvals()
From: Nicolin Chen <nicoleotsuka@gmail.com>
Date: 2018-01-17 06:54:30
Also in:
linuxppc-dev, lkml
Subsystem:
freescale soc sound drivers, sound, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Shengjiu Wang, Xiubo Li, Jaroslav Kysela, Takashi Iwai, Liam Girdwood, Mark Brown, Linus Torvalds
This patch cleans fsl_ssi_setup_regvals() by following changes: 1) Moving DBG bits to the first lines. 2) Setting SSIE, RE/TE as default and cleaning it for AC97 Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Tested-by: Caleb Crome <redacted> --- sound/soc/fsl/fsl_ssi.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index b76a517..e5efee2 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c@@ -580,18 +580,16 @@ static void fsl_ssi_setup_regvals(struct fsl_ssi *ssi) { struct fsl_ssi_regvals *vals = ssi->regvals; - vals[RX].sier = SSI_SIER_RFF0_EN; + vals[RX].sier = SSI_SIER_RFF0_EN | FSLSSI_SIER_DBG_RX_FLAGS; vals[RX].srcr = SSI_SRCR_RFEN0; - vals[RX].scr = 0; - vals[TX].sier = SSI_SIER_TFE0_EN; + vals[RX].scr = SSI_SCR_SSIEN | SSI_SCR_RE; + vals[TX].sier = SSI_SIER_TFE0_EN | FSLSSI_SIER_DBG_TX_FLAGS; vals[TX].stcr = SSI_STCR_TFEN0; - vals[TX].scr = 0; + vals[TX].scr = SSI_SCR_SSIEN | SSI_SCR_TE; /* AC97 has already enabled SSIEN, RE and TE, so ignore them */ - if (!fsl_ssi_is_ac97(ssi)) { - vals[RX].scr = SSI_SCR_SSIEN | SSI_SCR_RE; - vals[TX].scr = SSI_SCR_SSIEN | SSI_SCR_TE; - } + if (fsl_ssi_is_ac97(ssi)) + vals[RX].scr = vals[TX].scr = 0; if (ssi->use_dma) { vals[RX].sier |= SSI_SIER_RDMAE;
@@ -600,9 +598,6 @@ static void fsl_ssi_setup_regvals(struct fsl_ssi *ssi) vals[RX].sier |= SSI_SIER_RIE; vals[TX].sier |= SSI_SIER_TIE; } - - vals[RX].sier |= FSLSSI_SIER_DBG_RX_FLAGS; - vals[TX].sier |= FSLSSI_SIER_DBG_TX_FLAGS; } static void fsl_ssi_setup_ac97(struct fsl_ssi *ssi)
--
2.7.4