# Re: \[PATCH 6/6\] VMware balloon: Update vmw\_balloon.c to use the VMW\_PORT macro

- From: Greg KH \<gregkh@linuxfoundation.org\>
- Date: 2016-02-08 19:42:01 
- List: virtualization
- Page: https://ratatoskr.run/virtualization/2016/02/4680677
- Thread: https://ratatoskr.run/lkml/2016/01/4663701/t.md

```text
On Tue, Jan 19, 2016 at 01:46:05PM -0800, Sinclair Yeh wrote:
> Updated VMWARE_BALLOON_CMD to use the common VMW_PORT macro.
> Doing this rather than replacing all instances of VMWARE_BALLOON_CMD
> to minimize code change.
> 
> Signed-off-by: Sinclair Yeh <redacted>
> Reviewed-by: Thomas Hellstrom <redacted>
> Reviewed-by: Alok N Kataria <redacted>
> Acked-by: Xavier Deguillard <redacted>
> Cc: <redacted>
> Cc: Xavier Deguillard <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

> -#define VMWARE_BALLOON_CMD(cmd, arg1, arg2, result)		\
> -({								\
> -	unsigned long __status, __dummy1, __dummy2, __dummy3;	\
> -	__asm__ __volatile__ ("inl %%dx" :			\
> -		"=a"(__status),					\
> -		"=c"(__dummy1),					\
> -		"=d"(__dummy2),					\
> -		"=b"(result),					\
> -		"=S" (__dummy3) :				\
> -		"0"(VMW_BALLOON_HV_MAGIC),			\
> -		"1"(VMW_BALLOON_CMD_##cmd),			\
> -		"2"(VMW_BALLOON_HV_PORT),			\
> -		"3"(arg1),					\
> -		"4" (arg2) :					\
> -		"memory");					\
> -	if (VMW_BALLOON_CMD_##cmd == VMW_BALLOON_CMD_START)	\
> -		result = __dummy1;				\
> -	result &= -1UL;						\
> -	__status & -1UL;					\
> +#define VMWARE_BALLOON_CMD(cmd, arg1, arg2, result)			\
> +({									\
> +	unsigned long __status, __dummy1, __dummy2;			\
> +	unsigned long __si, __di;					\
> +	VMW_PORT(VMW_BALLOON_CMD_##cmd, arg1, arg2, 0,			\
> +		 VMW_BALLOON_HV_PORT, VMW_BALLOON_HV_MAGIC,		\
> +		 __status, result, __dummy1, __dummy2, __si, __di);	\
> +	if (VMW_BALLOON_CMD_##cmd == VMW_BALLOON_CMD_START)		\
> +		result = __dummy1;					\
> +	result &= -1UL;							\
> +	__status & -1UL;						\
>  })

Honestly, it doesn't look anymore "readable" to me, but it's your code
to maintain, not mine... :)
```
