[U-Boot] [U-BOOT] help on mmc driver

3 messages, 2 authors, 2013-01-25 · open the first message on its own page

[U-Boot] [U-BOOT] help on mmc driver

From: Jagannadha Sutradharudu Teki <hidden>
Date: 2013-01-24 16:34:52

Hi,

I need some help on mmc driver development on u-boot.

Few questions:
1. is mmc framework in u-boot supports all type of card interfaces like SD, MMC, and eMMC
2. If I write a driver do I need to develop the common driver for all or a separate drivers for individual cards.
3. Is there any drivers in current u-boot drivers/mmc have individual card interfaces support (SD & MMC & eMMC)
4. is there any drivers in current u-boot driver/mmc  for common card intefaces (SD | MMC | eMMC)

Request for help.

Thanks,
Jagan.


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

[U-Boot] [U-BOOT] help on mmc driver

From: Lukasz Majewski <hidden>
Date: 2013-01-24 18:50:06

Hi Jagannadha,
Hi,

I need some help on mmc driver development on u-boot.

Few questions:
1. is mmc framework in u-boot supports all type of card interfaces
like SD, MMC, and eMMC 
Yes there is a generic framework for MMC. -> ./drivers/mmc/ {mmc.c}
2. If I write a driver do I need to develop
the common driver for all or a separate drivers for individual cards.
This is a generic framework. Normally you only need to write MMC
controller specific code to use it.
3. Is there any drivers in current u-boot drivers/mmc have individual
card interfaces support (SD & MMC & eMMC) 
AS fair as I know there aren't any "special" drivers for any particular
vendor.
4. is there any drivers in
current u-boot driver/mmc  for common card intefaces (SD | MMC | eMMC)
Yes, you can refer to mmc.c
One good example is the sdhci.c code which serves for SD cards and eMMC
(at least for Samsung).
Request for help.

Thanks,
Jagan.


This email and any attachments are intended for the sole use of the
named recipient(s) and contain(s) confidential information that may
be proprietary, privileged or copyrighted under applicable law. If
you are not the intended recipient, do not read, copy, or forward
this email message or any attachments. Delete this email message and
any attachments immediately.


_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


-- 
Best regards,

Lukasz Majewski

Samsung R&D Poland (SRPOL) | Linux Platform Group

[U-Boot] [U-BOOT] help on mmc driver

From: Jagannadha Sutradharudu Teki <hidden>
Date: 2013-01-25 15:45:09

Hi Lukasz Majewski,

Thanks for your information.

Thanks,
Jagan.
-----Original Message-----
From: Lukasz Majewski [mailto:l.majewski at samsung.com]
Sent: 25 January 2013 00:20
To: Jagannadha Sutradharudu Teki
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] [U-BOOT] help on mmc driver

Hi Jagannadha,
quoted
Hi,

I need some help on mmc driver development on u-boot.

Few questions:
1. is mmc framework in u-boot supports all type of card interfaces
like SD, MMC, and eMMC
Yes there is a generic framework for MMC. -> ./drivers/mmc/ {mmc.c}
quoted
2. If I write a driver do I need to develop the common driver for all
or a separate drivers for individual cards.
This is a generic framework. Normally you only need to write MMC controller
specific code to use it.
quoted
3. Is there any drivers in current u-boot drivers/mmc have individual
card interfaces support (SD & MMC & eMMC)
AS fair as I know there aren't any "special" drivers for any particular vendor.
quoted
4. is there any drivers in
current u-boot driver/mmc  for common card intefaces (SD | MMC |
eMMC)

Yes, you can refer to mmc.c
One good example is the sdhci.c code which serves for SD cards and eMMC
(at least for Samsung).
quoted
Request for help.

Thanks,
Jagan.


This email and any attachments are intended for the sole use of the
named recipient(s) and contain(s) confidential information that may be
proprietary, privileged or copyrighted under applicable law. If you
are not the intended recipient, do not read, copy, or forward this
email message or any attachments. Delete this email message and any
attachments immediately.


_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


--
Best regards,

Lukasz Majewski

Samsung R&D Poland (SRPOL) | Linux Platform Group


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help