In message [off-list ref] you wrote:
This is me reminding you that the top of the tree still does not
restore the environment on most 8xx boards...
I don't think your claim of "most 8xx boards" is valid. All boards I
was able to test (because I had access to the hardware) are OK. The
only board with (potential) problems I am aware of is the ICU862.
Or am I wrong?
Please revisit this. This is your monthly reminder!
Thanks.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Put your Nose to the Grindstone!
-- Amalgamated Plastic Surgeons and Toolmakers, Ltd.
Sorry, yes, it affects FADS and ICU86x, I have 5 different boards now,
all are similar to the fads, which is why it feels like "most 8xx" to
me.
apologies for the hyperbole.
On Sat, Aug 02, 2003 at 11:37:08AM +0200, Wolfgang Denk wrote:
In message [off-list ref] you wrote:
quoted
This is me reminding you that the top of the tree still does not
restore the environment on most 8xx boards...
I don't think your claim of "most 8xx boards" is valid. All boards I
was able to test (because I had access to the hardware) are OK. The
only board with (potential) problems I am aware of is the ICU862.
Or am I wrong?
quoted
Please revisit this. This is your monthly reminder!
Thanks.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Put your Nose to the Grindstone!
-- Amalgamated Plastic Surgeons and Toolmakers, Ltd.
nyet at mrv.com wrote:
Sorry, yes, it affects FADS and ICU86x, I have 5 different boards now,
all are similar to the fads, which is why it feels like "most 8xx" to
me.
apologies for the hyperbole.
The changes I made to cpu/mpc8xx/start.S sorted this out for us (as
supplied a couple of weeks ago to this list) - I've not been able to
work out why FADS and ICU862 are treated as a special case. Simply
putting the environment after the code such that its *NOT* embedded and
removing the special case in the GOT table works OK - maybe its
coincidence :-))
--
Robin Gilks
Senior Design Engineer Phone: (+64)(3) 357 1569
Tait Electronics Fax : (+64)(3) 359 4632
PO Box 1645 Christchurch Email : robin.gilks at tait.co.nz
New Zealand