--- v2
+++ v10
@@ -21,6 +21,45 @@
 Patch "add PPv23 version definition" to differ between v23 and v22 hardware.
 Patch "add TX FC firmware check" verifies that CM3 firmware supports Flow Control monitoring.
 
+v9 --> v10
+- Add CM3 SRAM description to PPv2 documentation
+
+v8 --> v9
+- Replace generic pool allocation with devm_ioremap_resource
+
+v7 --> v8
+- Reorder "always compare hw-version vs MVPP21" and "add PPv23 version definition" commits
+- Typo fixes
+- Remove condition fix from "add RXQ flow control configurations"
+
+v6 --> v7
+- Reduce patch set from 18 to 15 patches
+ - Documentation change combined into a single patch
+ - RXQ and BM size change combined into a single patch
+ - Ring size change check moved into "add RXQ flow control configurations" commit
+
+v5 --> v6
+- No change
+
+v4 --> v5
+- Add missed Signed-off
+- Fix warnings in patches 3 and 12
+- Add revision requirement to warning message
+- Move mss_spinlock into RXQ flow control configurations patch
+- Improve FCA RXQ non occupied descriptor threshold commit message
+
+v3 --> v4
+- Remove RFC tag
+
+v2 --> v3
+- Remove inline functions
+- Add PPv2.3 description into marvell-pp2.txt
+- Improve mvpp2_interrupts_mask/unmask procedure
+- Improve FC enable/disable procedure
+- Add priv->sram_pool check
+- Remove gen_pool_destroy call
+- Reduce Flow Control timer to x100 faster
+
 v1 --> v2
 - Add memory requirements information
 - Add EPROBE_DEFER if of_gen_pool_get return NULL
@@ -28,32 +67,29 @@
 - Add firmware version info with Flow control support
 
 Konstantin Porotchkin (1):
-  dts: marvell: add CM3 SRAM memory to cp115 ethernet device tree
+  dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree
 
-Stefan Chulski (17):
-  doc: marvell: add cm3-mem device tree bindings description
+Stefan Chulski (14):
+  doc: marvell: add CM3 address space and PPv2.3 description
   net: mvpp2: add CM3 SRAM memory map
+  net: mvpp2: always compare hw-version vs MVPP21
   net: mvpp2: add PPv23 version definition
-  net: mvpp2: always compare hw-version vs MVPP21
-  net: mvpp2: increase BM pool size to 2048 buffers
-  net: mvpp2: increase RXQ size to 1024 descriptors
+  net: mvpp2: increase BM pool and RXQ size
   net: mvpp2: add FCA periodic timer configurations
   net: mvpp2: add FCA RXQ non occupied descriptor threshold
-  net: mvpp2: add spinlock for FW FCA configuration path
   net: mvpp2: enable global flow control
   net: mvpp2: add RXQ flow control configurations
   net: mvpp2: add ethtool flow control configuration support
   net: mvpp2: add BM protection underrun feature support
   net: mvpp2: add PPv23 RX FIFO flow control
   net: mvpp2: set 802.3x GoP Flow Control mode
-  net: mvpp2: limit minimum ring size to 1024 descriptors
   net: mvpp2: add TX FC firmware check
 
- Documentation/devicetree/bindings/net/marvell-pp2.txt |   1 +
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi         |  10 +
- drivers/net/ethernet/marvell/mvpp2/mvpp2.h            | 130 ++++-
- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c       | 558 +++++++++++++++++++-
- 4 files changed, 657 insertions(+), 42 deletions(-)
+ Documentation/devicetree/bindings/net/marvell-pp2.txt |   6 +-
+ arch/arm64/boot/dts/marvell/armada-cp11x.dtsi         |   2 +-
+ drivers/net/ethernet/marvell/mvpp2/mvpp2.h            | 124 ++++-
+ drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c       | 526 ++++++++++++++++++--
+ 4 files changed, 609 insertions(+), 49 deletions(-)
 
 -- 
 1.9.1