Inter-revision diff: patch 12

Comparing v4 (message) to v3 (message)

--- v4
+++ v3
@@ -1,99 +1,43 @@
-qca8081 phy is a single port phy, configure
-phy the lower seed value to make it linked as slave
-mode easier.
+1. The master/slave seed needs to be updated when the link can't
+be created.
+
+2. The case where two qca8081 PHYs are connected each other and
+master/slave seed is generated as the same value also needs
+to be considered, so adding this code change into read_status
+instead of link_change_notify.
 
 Signed-off-by: Luo Jie <luoj@codeaurora.org>
 ---
- drivers/net/phy/at803x.c | 48 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 48 insertions(+)
+ drivers/net/phy/at803x.c | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
 
 diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
-index 3096ed51dbae..f372f6ab78f6 100644
+index 5d007f89e9d3..77aaf9e72781 100644
 --- a/drivers/net/phy/at803x.c
 +++ b/drivers/net/phy/at803x.c
-@@ -215,6 +215,12 @@
- #define QCA808X_PHY_MMD3_DEBUG_6		0xa011
- #define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
+@@ -1556,6 +1556,22 @@ static int qca808x_read_status(struct phy_device *phydev)
+ 	else
+ 		phydev->interface = PHY_INTERFACE_MODE_SMII;
  
-+/* master/slave seed config */
-+#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
-+#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
-+#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
-+#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
++	/* generate seed as a lower random value to make PHY linked as SLAVE easily,
++	 * except for master/slave configuration fault detected.
++	 * the reason for not putting this code into the function link_change_notify is
++	 * the corner case where the link partner is also the qca8081 PHY and the seed
++	 * value is configured as the same value, the link can't be up and no link change
++	 * occurs.
++	 */
++	if (!phydev->link) {
++		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
++			qca808x_phy_ms_seed_enable(phydev, false);
++		} else {
++			qca808x_phy_ms_random_seed_set(phydev);
++			qca808x_phy_ms_seed_enable(phydev, true);
++		}
++	}
 +
- MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
-@@ -1476,6 +1482,26 @@ static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
  	return 0;
  }
  
-+static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev)
-+{
-+	u16 seed_value = (prandom_u32() % QCA808X_MASTER_SLAVE_SEED_RANGE);
-+
-+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+			QCA808X_MASTER_SLAVE_SEED_CFG,
-+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value));
-+}
-+
-+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
-+{
-+	u16 seed_enable = 0;
-+
-+	if (enable)
-+		seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE;
-+
-+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+			QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable);
-+}
-+
- static int qca808x_config_init(struct phy_device *phydev)
- {
- 	int ret;
-@@ -1497,6 +1523,16 @@ static int qca808x_config_init(struct phy_device *phydev)
- 	if (ret)
- 		return ret;
- 
-+	/* Configure lower ramdom seed to make phy linked as slave mode */
-+	ret = qca808x_phy_ms_random_seed_set(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* Enable seed */
-+	ret = qca808x_phy_ms_seed_enable(phydev, true);
-+	if (ret)
-+		return ret;
-+
- 	/* Configure adc threshold as 100mv for the link 10M */
- 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
- 			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
-@@ -1529,6 +1565,17 @@ static int qca808x_read_status(struct phy_device *phydev)
- 	return 0;
- }
- 
-+static int qca808x_soft_reset(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_soft_reset(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	return qca808x_phy_ms_seed_enable(phydev, true);
-+}
-+
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -1686,6 +1733,7 @@ static struct phy_driver at803x_driver[] = {
- 	.resume			= genphy_resume,
- 	.read_status		= qca808x_read_status,
- 	.config_init		= qca808x_config_init,
-+	.soft_reset		= qca808x_soft_reset,
- }, };
- 
- module_phy_driver(at803x_driver);
 -- 
 The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help