--- v1
+++ v4
@@ -1,19 +1,46 @@
 This patch series add the qca8081 ethernet phy driver support, which
-improve the wol feature, leverage at803x phy driver and add the cdt
-feature.
+improve the wol feature, leverage at803x phy driver and add the fast
+retrain, master/slave seed and CDT feature.
+
+Changes in v4:
+	* handle other interrupts in set_wol.
+	* add genphy_c45_fast_retrain.
+
+Changes in v3:
+	* correct a typo "excpet".
+	* remove the suffix "PHY" from phy name.
+
+Changes in v2:
+	* add definitions of fast retrain related registers in mdio.h.
+	* break up the patch into small patches.
+	* improve the at803x legacy code.
 
 Changes in v1:
 	* merge qca8081 phy driver into at803x.
 	* add cdt feature.
 	* leverage at803x phy driver helpers.
 
-Luo Jie (3):
-  net: phy: improve the wol feature of at803x
+Luo Jie (14):
+  net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
+  net: phy: at803x: use phy_modify()
+  net: phy: at803x: improve the WOL feature
+  net: phy: at803x: use GENMASK() for speed status
   net: phy: add qca8081 ethernet phy driver
-  net: phy: add cdt feature of qca8081 phy
+  net: phy: add qca8081 read_status
+  net: phy: add qca8081 get_features
+  net: phy: add qca8081 config_aneg
+  net: phy: add constants for fast retrain related register
+  net: phy: add genphy_c45_fast_retrain
+  net: phy: add qca8081 config_init
+  net: phy: add qca8081 soft_reset and enable master/slave seed
+  net: phy: adjust qca8081 master/slave seed value if link down
+  net: phy: add qca8081 cdt feature
 
- drivers/net/phy/at803x.c | 632 ++++++++++++++++++++++++++++++++++-----
- 1 file changed, 557 insertions(+), 75 deletions(-)
+ drivers/net/phy/at803x.c  | 580 +++++++++++++++++++++++++++++++++++---
+ drivers/net/phy/phy-c45.c |  34 +++
+ include/linux/phy.h       |   1 +
+ include/uapi/linux/mdio.h |   9 +
+ 4 files changed, 577 insertions(+), 47 deletions(-)
 
 -- 
 The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,