# \[PATCH net-next v11 01/13\] dt-bindings: dpll: allow hex unit addresses on output pins

- From: Ali Rouhi \<hidden\>
- Date: 2026-09-30 23:37:21 
- List: netdev
- Page: https://ratatoskr.run/netdev/2026/09/17675412
- Thread: https://ratatoskr.run/linux-devicetree/2026/09/17675414/t.md

```text
From: Oleg Zadorozhnyi <redacted>

The output-pins node matches its children against "^pin@[0-9]+$", while
input-pins takes "^pin@[0-9a-f]+$".  A unit address is the reg value in
hex, so a device with more than ten outputs cannot describe the
eleventh: dtc wants pin@a for reg = <10>, and the output pattern refuses
it.

Use the input pattern for the outputs as well.

Fixes: 0afcee10dda1 ("dt-bindings: dpll: Add DPLL device and pin")
Signed-off-by: Oleg Zadorozhnyi <redacted>
Assisted-by: Claude:claude-4-opus [chat]
Signed-off-by: Ali Rouhi <redacted>
---
 Documentation/devicetree/bindings/dpll/dpll-device.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
index fb8d7a9a3693..4b5184500b9f 100644
--- a/Documentation/devicetree/bindings/dpll/dpll-device.yaml
+++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
@@ -65,7 +65,7 @@ properties:
         const: 0
 
     patternProperties:
-      "^pin@[0-9]+$":
+      "^pin@[0-9a-f]+$":
         $ref: /schemas/dpll/dpll-pin.yaml
         unevaluatedProperties: false
 
-- 
2.43.0

```
