[PATCH net-next v1] r8169: set eee_enable_default base on LPI cap
From: javen <hidden>
Date: 2026-09-16 08:14:28
Also in:
lkml
Subsystem:
8169 10/100/1000 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Javen Xu <redacted> When initializing phylink configuration, if LPI capabilities is non-zero, it indicates the hardware supports EEE, thus we enable it by default. Signed-off-by: Javen Xu <redacted> --- drivers/net/ethernet/realtek/r8169_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index b6f7d212ed77..6923069266f2 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c@@ -6583,6 +6583,7 @@ static int rtl_init_phylink(struct rtl8169_private *tp) tp->phylink_config.type = PHYLINK_NETDEV; tp->phylink_config.mac_managed_pm = true; tp->phylink_config.lpi_capabilities = rtl8169_get_lpi_caps(tp); + tp->phylink_config.eee_enabled_default = !!tp->phylink_config.lpi_capabilities; tp->phylink_config.mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE; switch (tp->sfp_mode) {
--
2.43.0